Full Product Manual
Table Of Contents
- Important Information
- Password Recovery
- Live View
- Live View Mode
- Live View Icons & Controls
- Main Menu
- Menu Layout
- Camera Configuration
- Display: Live
- Display: Privacy Zone
- Enabling a Privacy Mask
- Record: Mainstream
- Record: Substream
- Alarm: Detection
- Alarm: Detection - Actions
- Motion Detection Setup
- Motion Detection Tips
- Thermal-Sensing Camera Tips
- Alarm: Deterrent
- Spotlight Detection Setup
- Spotlight Trigger Schedule
- Device: PTZ
- Recording Configuration
- Record: Record
- Alarm: Detection
- Capture: Capture
- Capture: Schedule
- System Configuration
- Display: Display Configuration
- Network: Network
- Network: Email Configuration
- Network: Email Schedule
- Network: DDNS
- Network: IP Filter
- Network: Date and Time
- Device: HDD
- Device: S.M.A.R.T
- Device: Cloud Storage
- System: General
- System: Users
- Advanced: Maintain
- Advanced: Events
- Advanced: Auto Upgrade
- System Status
- System: Info
- System: Channel Information
- System: Record Info
- System: Network State
- Glossary
- Warranty Information
43
Click for contents
Device: S.M.A.R.T
Self-check Type: There are three types available:
Short: This test verifies major components of the hard drive such as read/
write heads, electronics and internal memory.
Long: This is a longer test that verifies the above as well as performing a
surface scan to reveal problematic areas (if any) and forces bad sector relo-
cation.
Conveyance: This is a very quick test that verifies the mechanical parts of the
hard drive are working.
When performing a test, your DVR will continue to work as normal.
In most circumstances, the information here will not be needed for general
use of your DVR, however one of our Swann Helpdesk & Technical Support
staff may ask you to access this if you call for assistance.
Right-click the mouse to exit.
This function can be used to display technical
information on the hard drive installed inside
your DVR. You can also perform a test (there
are three types available) to evaluate and de-
tect potential drive errors.