Full Product Manual
Table Of Contents
- Important Information
- Password Recovery
- Live View
- Live View Mode
- Live View Icons & Controls
- Main Menu
- Menu Layout
- Camera Configuration
- Display: Live
- Display: Privacy Zone
- Enabling a Privacy Mask
- Record: Mainstream
- Record: Substream
- Alarm: Detection
- Alarm: Detection - Actions
- Motion Detection Setup
- Motion Detection Tips
- Thermal-Sensing Camera Tips
- Alarm: Deterrent
- Spotlight Detection Setup
- Spotlight Trigger Schedule
- Device: PTZ
- Recording Configuration
- Record: Record
- Alarm: Detection
- Capture: Capture
- Capture: Schedule
- System Configuration
- Display: Display Configuration
- Network: Network
- Network: Email Configuration
- Network: Email Schedule
- Network: DDNS
- Network: IP Filter
- Network: Date and Time
- Device: HDD
- Device: S.M.A.R.T
- Device: Cloud Storage
- System: General
- System: Users
- Advanced: Maintain
- Advanced: Events
- Advanced: Auto Upgrade
- System Status
- System: Info
- System: Channel Information
- System: Record Info
- System: Network State
- Glossary
- Warranty Information
45
Click for contents
System: General
Device Name: Click the dialogue box to rename your DVR (if required).
Language: Select a language you would like the system menus to be dis-
played in. Multiple languages are available.
Video Format: Select the correct video standard for your country. USA and
Canada are NTSC. UK, Australia and New Zealand are PAL.
Menu Timeouts: Click the drop down menu to select the time your DVR will
exit the Main Menu when idle. You can also disable this by selecting “OFF”
(password protection will be temporarily disabled).
Mode: Your DVR supports an additional mode called XVR. This allows you to
configure IP cameras, that are connected to your home network, to work with
your DVR. This mode will be covered in a future manual update.
Watermark: By default, the Swann logo is overlaid as a watermark for each
camera connected. If this isn’t required, click the drop down menu to disable.
Show Wizard: Click the checkbox if you would like to display the Startup Wiz-
ard each time you turn on or reboot your DVR.
→ Click “Default” to revert to default settings.
→ Click “Apply” to save settings.