Full Product Manual
Table Of Contents
- Important Information
- Password Recovery
- Live View
- Live View Mode
- Live View Icons & Controls
- Main Menu
- Menu Layout
- Camera Configuration
- Display: Live
- Display: Privacy Zone
- Enabling a Privacy Mask
- Record: Mainstream
- Record: Substream
- Alarm: Detection
- Alarm: Detection - Actions
- Motion Detection Setup
- Motion Detection Tips
- Thermal-Sensing Camera Tips
- Alarm: Deterrent
- Spotlight Detection Setup
- Spotlight Trigger Schedule
- Device: PTZ
- Recording Configuration
- Record: Record
- Alarm: Detection
- Capture: Capture
- Capture: Schedule
- System Configuration
- Display: Display Configuration
- Network: Network
- Network: Email Configuration
- Network: Email Schedule
- Network: DDNS
- Network: IP Filter
- Network: Date and Time
- Device: HDD
- Device: S.M.A.R.T
- Device: Cloud Storage
- System: General
- System: Users
- Advanced: Maintain
- Advanced: Events
- Advanced: Auto Upgrade
- System Status
- System: Info
- System: Channel Information
- System: Record Info
- System: Network State
- Glossary
- Warranty Information
47
Click for contents
Advanced: Maintain
Default User: Admin is the default user account. If multiple user accounts
have been created, click the drop down menu to disable.
Auto Reboot: It is recommended to leave this enabled, as it maintains the
operational integrity of your DVR.
Time: Choose an appropriate day and time to reboot your DVR.
Update: Click this button to update the firmware from a USB flash drive. Se-
lect the firmware file then “OK” to confirm. When the firmware update has
completed, your DVR will reboot automatically.
Save Settings: Click this button to export a configuration file containing all
the settings that you have customised.
Load Default: Click this button to restore factory default settings. Click “All”
then click “Save”. Your DVR will reboot and the Startup Wizard will appear
on-screen.
Load Settings: Click this button to import a configuration file containing all
the settings that you have customised.
→ Click “Default” to revert to default settings.
→ Click “Apply” to save settings.