Full Product Manual
Table Of Contents
- Important Information
- Password Recovery
- Live View
- Live View Mode
- Live View Icons & Controls
- Main Menu
- Menu Layout
- Camera Configuration
- Display: Live
- Display: Privacy Zone
- Enabling a Privacy Mask
- Record: Mainstream
- Record: Substream
- Alarm: Detection
- Alarm: Detection - Actions
- Motion Detection Setup
- Motion Detection Tips
- Thermal-Sensing Camera Tips
- Alarm: Deterrent
- Spotlight Detection Setup
- Spotlight Trigger Schedule
- Device: PTZ
- Recording Configuration
- Record: Record
- Alarm: Detection
- Capture: Capture
- Capture: Schedule
- System Configuration
- Display: Display Configuration
- Network: Network
- Network: Email Configuration
- Network: Email Schedule
- Network: DDNS
- Network: IP Filter
- Network: Date and Time
- Device: HDD
- Device: S.M.A.R.T
- Device: Cloud Storage
- System: General
- System: Users
- Advanced: Maintain
- Advanced: Events
- Advanced: Auto Upgrade
- System Status
- System: Info
- System: Channel Information
- System: Record Info
- System: Network State
- Glossary
- Warranty Information
48
Click for contents
Advanced: Events
Enable: Click the checkbox if you would like to disable alerts for the event
available.
Buzzer: Click the drop down menu and select the time period for the internal
buzzer to activate for the event available.
Show Message: Click the checkbox if you like to disable the on-screen mes-
sage for the event available.
Send Email: Click the checkbox if you would like to disable email alerts for
the event available.
→ Click “Default” to revert to default settings.
→ Click “Apply” to save settings.
Whenever there is an event or if your DVR dis-
plays unusual behaviour, you can be alerted to
in multiple ways such as receiving an email,
displaying a message on-screen, receiving an
alert in the Swann Security app and activating
its internal buzzer. There are three event types
that your DVR will detect as an exception.