SDS

SAFETY DATA SHEET
PREMIER BUILDING SOLUTIONS, INC.
Page 5 of 21
Version: 1.2
Revision Date: 12/5/2016
XTRABOND 250 100% RTV SILICONE SEALANT
5
Carbon Black
(if needed)
1333-86-4
TWA
3.5 mg/m3
NIOSH REL
TWA
3.5 mg/m3
OSHA Z-1
TWA (Inhalation
fraction)
3 mg/m3
ACGIH
Aluminum (if
needed)
7429-90-5
TWA (Respirable)
5 mg/m³
NIOSH REL
TWA (total)
10 mg/m³
NIOSH REL
TWA (total dust)
15 mg/m³ (Aluminum)
OSHA Z-1
TWA (Respirable
fraction)
5 mg/m³ (Aluminum)
OSHA Z-1
TWA (welding
fumes)
5 mg/m³ (Aluminum)
NIOSH REL
TWA (pyro
powders)
5 mg/m³ (Aluminum)
NIOSH REL
TWA (Respirable
fraction)
1 mg/m³ (Aluminum)
ACGIH
These substances are inextricably bound in the product and therefore do not contribute
to a dust inhalation hazard
Silicon dioxide
Engineering measures
Processing may form hazardous compounds (see section 10). Ensure adequate ventilation,
especially in confined areas. Minimize workplace exposure concentrations. Dust formation may
be relevant in the processing of this product. In addition to substance-specific OELs, general
limitations of concentrations of particulates in the air at workplaces have to be considered in
workplace risk assessment. Relevant limits include: OSHA PEL for Particulates Not Otherwise
Regulated of 15 mg/m3 - total dust, 5 mg/m3 - Respirable fraction; and ACGIH TWA for
Particles (insoluble or poorly soluble) Not Otherwise Specified of 3 mg/m3 - Respirable
particles, 10 mg/m3 - inhalable particles.
Skin and Body Protection
Skin should be washed after contact
Individual protection measures, such as personal protective equipment
Eye Protection
Wear the following personal protective equipment: Safety glasses
Hand Protection