Installation Guide

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in serious injury or
death.
Electrocution Hazard
Water and other liquids conduct electric current
and can create a short circuit, resulting in injury
or death. Keep all liquids away from electrical cords and
power tools. DO NOT create a short circuit between a source
of electricity and a liquid by being in contact with both
simultaneously.
General Information
Required Tools
 Saber saw (straight up and down travel) with bi-metal blade
(14 teeth per inch)
 Drill with 3/8 inch drill bit
 Hole saw for faucet(s), bathtub spout, and/or shower head
 Tape measure
 Masking tape (2 inch wide works best)
 Level
 Caulking gun
 Medium grit sandpaper
 Clean paper towels or shop towels
 Lumber, as required for bracing (see Bracing Instructions)
 Denatured alcohol
Bathtub Wall Kit Contents
Confirm that all parts of the kit have been included before
beginning installation.
SS-60-3 Bathtub Wall Kit
One back panel
Two side panels
Two corner moldings
Designed for bathtub
enclosures 60 inches wide
and 30 inches deep. Wall
panels are 60 inches high.
For installation of this kit,
order optional SS-29
Installation Kit.
SSIT-60-3 Bathtub Wall Kit
One back panel with
integral trim
Two right side panels with
integral trim
One left-side apron strip
One right-side apron strip
Designed for bathtub
enclosures 60 inches wide
and 33-1/2 inches deep.
Wall panels are 60 inches
high. For installation of
this kit, order optional
SS-29 Installation Kit.
SS-60-5 Bathtub Wall Kit
One back panel with
molded soap and
shampoo shelves
Four wall panels
Two corner moldings
Three tubes clear silicone
Two tubes color match
silicone
Designed for bathtub
enclosures 60 inches wide
and 30 inches deep. Wall
panels are 60 inches high.
SS-72-3 Bathtub Wall Kit
One back panel
Two side panels
Two corner moldings
Designed for bathtub
enclosures up to 60
inches wide and 30
inches deep. Wall panels
are 72 inches high. For
installation of this kit,
order optional SS-29
Installation Kit.
SSWP-4872 Bathtub Wall Kit
One back panel
Two corner panels
Two side panels
Two soap dishes
Four tubes clear silicone
Two tubes color match
silicone
Designed for bathtub
enclosures 72 inches wide
and 48 inches deep. Wall
panels are 60 inches high.
SS-29 Installation Kit
One tube color-coordinated caulking
Four tubes silicone adhesive
SS-72 Installation Kit
One tube color-matched caulking
One tube silicone adhesive
WARNING
The Swan Corporation 4 800-325-7008
Safety Guidelines General Information
SS-60-3
SSIT-60-3
SS-60-5
SSWP-4872
SS-72-3