Installation Guide

TI-55 Extension Kit (Tile Design)
One back panel
Two corner panels
Two side panels
One tube of silicone adhesive
One tube of color coordinated caulk
Designed for use with TI-5 Fiberglass Wall Kit. Fits
bathtub enclosures 53 to 60 inches wide and 29 to 30
inches deep. Wall panels are 24 inches high.
TI-3 Bathtub Wall Kit (Tile Design)
One back panel
Two side panels
Three tubes of silicone adhesive
One tube of color coordinated caulk
Designed for bathtub enclosures 53 to 60 inches wide
and 29 to 30 inches deep. Wall panels are 59-5/8
inches high.
TI-33 Extension Kit (Tile Design)
One back panel
Two side panels
One tube of silicone adhesive
One tube of color coordinated caulk
Designed for use with TI-3 Fiberglass Wall Kit. Fits
bathtub enclosures 53 to 60 inches wide and 29 to 30
inches deep. Wall panels are 24 inches high.
GN-58 Tub Wall Kit (Natural Gloss Design)
One back panel
One left corner-side panel
One right corner-side panel
Three tubes of silicone adhesive
One tube of color coordinated caulk
Designed for bathtub enclosures up to 60 inches wide
and 29 to 30 inches deep. Wall panels are 58 inches
high.
TI-7236 Shower Wall Kit (Tile Design)
One back panel
Two corner panels
Two side panels
Four tubes of silicone adhesive
One tube of color coordinated caulk
Designed for shower enclosures 29-1/4 to 39-3/4 inches
wide and 31 to 36 inches deep. Wall panels are 71-5/8
inches high.
Note 1: Corner panels are different widths. Refer to
chart in Installation Instructions for correct orientation.
Note 2: Bull nose (curved) edges on side panels must
face to the outside of the shower for proper installation.
TI-7248 Shower Wall Kit (Tile Design)
One back panel
Two corner panels
Two side panels
Four tubes of silicone adhesive
One tube of color coordinated caulk
Designed for shower enclosures 41-1/4 to 51-3/4 inches
wide and 31 to 36 inches deep. Wall panels are 71-5/8
inches high.
Note 1: Corner panels are different widths. Refer to
chart in Installation Instructions for correct orientation.
Note 2: Bull nose (curved) edges on side panels must
face to the outside of the shower for proper installation.
TI-7260 Shower Wall Kit (Tile Design)
One back panel
Two corner panels
Two side panels
Five tubes of silicone adhesive
One tube of color coordinated caulk
Designed for shower enclosures 53-1/4 to 64-3/4 inches
wide and 31 to 36 inches deep. Wall panels are 71-5/8
inches high.
Note 1: Corner panels are different widths. Refer to
chart in Installation Instructions for correct orientation.
Note 2: Bull nose (curved) edges on side panels must
face to the outside of the shower for proper installation.
TI-NEO-DTF Corner Shower Wall Kit (Tile Design)
One corner panel
Two side panels
Two apron strips
Three tubes of silicone adhesive
One tube of color coordinated caulk
Designed for corner shower enclosures with 36 to 38
inch deep side walls. Wall panels are 71-5/8 inches
high.
Note 1: Bull nose (curved) edges on side panels must
face to the outside of the shower for proper installation.
Note 2: If the distance from the inside corner to the
front edge of the apron is more than 38 inches, the
apron strips may have to be discarded.
General Information
800-325-7008 7 The Swan Corporation