User Manual

Thank you for purchasing the Stealth water-bl ock. This product is intended for expert user s. Please

consult with a qualified technician for installation. Improper install ation may result in damage to your

components. Swiftech™ assumes no liability whatsoever, expressed or implied, for the use of this

product, nor its installation. The following instruction s are subject to change without notice. Please

visit our web site at

www.swiftech.com for updates.

Packing List

Qty Description

1 Stealth water-block

1 Arctic Céramique™ the rma l grease

2 ea. 1/2” barbs and hose clam ps

9 Spring-loaded screws

1 Mosfet heatsink with mounting

hardware

Assembly Schematic

Rouchon Industries, Inc., dba Swiftech –3700 Industry Avenue, suite 104, La kewood, CA 90712 – Toll free (US) 888-857-9438 – Fax 562-

595-8769 - E Mail: help@swiftech.com – URL: http://www.swiftech.com

- Information subject to change without notice

PAGE 1
Thank you for purchasing the Stealth water-block. This product is intended for expert users. Please consult with a qualified technician for installation. Improper installation may result in damage to your components. Swiftech™ assumes no liability whatsoever, expressed or implied, for the use of this product, nor its installation. The following instructions are subject to change without notice. Please visit our web site at www.swiftech.com for updates. Packing List Qty 1 1 2 ea.
PAGE 2
Step-by-step instructions Cleaning Substrate surfaces should be clean and dry prior to the thermal pad application to ensure best thermal performance. Isopropyl alcohol (isopropanol) applied with a lint-free wipe or swab should be adequate for removing surface contamination such as dust or fingerprints.