swisherinc.com OWNER’S MANUAL 20110 Commercial Pro Truck Spreader Starting Serial #: L215-001001 CHANGING YOUR LANDSCAPE SINCE 1945 IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment.
LIMITED WARRANTY The manufacturer’s warranty to the original consumer purchaser is: This product is free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship. This warranty is subject to the following limitations and exclusions: 1.
SAFETY PRECAUTIONS This Safety Alert Symbol indicates important messages in this manual. When you see this symbol, carefully read the message that follows and be alert to the possibility of personal injury. Read this manual completely. Failure to observe the following safety instructions could result in serious injury or death. • Read the manual. Learn to operate the attachment safely.
Item # 1 2 3 4 5 6 7 8 9 10 11 12 Part # 10192 10111* 10112* NB555 7825Z 10051 NB579 10113 NB556 NB505 NB181 10975 Description Washer - Nylon Retainer 5/16 Bracket - Motor Support, Upper Gate - Hopper Washer - USS Flat, 1/2 Bushing Spring - Gate Washer - 5/16 X 1 1/4 OD Deflector Washer - USS Flat, 5/16 Bolt - 5/16-18 X 1 1/2 HCC Nut - Nyloc 5/16-18 Hopper Step 1: Hopper Gate Assembly • Assemble the Deflector (8), Hopper Gate (3) and Upper Motor Support Bracket (2) together using four 5/16-18 X 1 ½” Bolt
Step 3: Motor Assembly • Tip: Items 3, 4 and 5 are preassembled. • Remove the Snap Ring (1) from the Motor (5) using a small flat head screwdriver. Slide the Spinner Disc (2) onto the Motor Shaft and secure with the Snap Ring. If the snap ring is difficult to install by hand, use a pair of pliers to install it. • Insert the 5/16-18 X 1” Carriage Bolts (6) through the square holes of the Lower Motor Bracket (4), through the slots of the Upper Motor Bracket (2 on pg 4) and through the Spreader Shield (8).
Item # 1 2 3 4 5 6 7 8 Part # 10176 NB181 NB579 10979* 10976* NB501 NB556 H1P Description Lid - Hopper Nut - Nyloc 5/16-18 Washer - 5/16 X 1 1/4 OD Support - RH Weldment Support - LH Weldment Bolt - 5/16-18 X 1 Washer - USS Flat, 5/16 Plug - 1 1/2 Cap, Square Step 4: Attaching the Hopper Support Tubes • Attach the Support Tube Weldments (4 & 5) to the Hopper (12 on pg 4) by inserting the 5/16-18 X 1” Bolts (6) through the smaller 5/16” Washers (7) and weldment, and into the holes on the side of the Hoppe
Item # 1 2 3 4 5 6 Part # 9855 20135* 13964 NB182 20132* NB272 Description Bolt - U, Sq 3/8-16 X 1 5/8 X 2 3/4 Plate - Height Adjustment Bolt - Serrated Flange 3/8-16 X 1 Nut - Nyloc 3/8-16 Weldment - Mount Washer - SAE Flat 3/8 Tip: Find an assistant to help when attaching or removing the Truck Spreader. Care must be taken while lifting to avoid personal injury or equipment damage.
Step 6: Wiring Harness Assembly • Connect the Motor (1) to the 12V Wiring Harness (2) by interlocking the molded connectors. • Tip: Use the Black Zip Tie (7 on pg 5) to secure the wires of the Motor (1) to the Spreader Shield (8 on pg 5). • To turn on the Motor (1), plug in the 12V plug into your vehicles 12V power outlet.
Material Spreading Chart (Calibrated at 4 mph Ground Speed) P roduc t S e tting 1 lbs/Acre 41 @ 4 mph 20 @ 4 mph S e tting 2 lbs/Acre 169 @ 4 mph 84 @ 4 mph Roc k S a lt N/A N/A N/A N/A Dry S a nd 151 @ 4 mph 75 @ 8 mph 536 @ 4 mph 268 @ 8 mph N/A N/A N/A N/A Ba rle y N/A N/A 56 @ 4 mph 28 @ 8 mph 170 @ 4 mph 85 @ 8 mph N/A N/A O a ts N/A N/A 82 @ 4 mph 41 @ 8 mph 288 @ 4 mph 144 @ 8 mph N/A N/A Re d Fe sc ue N/A N/A 53 @ 4 mph 26 @ 8 mph N/A N/A N/A N/A Fe rtilize r S e tting 3 l
NOTES: ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ________
NOTES: ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ______________________________________________________________________ ________
swisherinc.com OWNER’S MANUAL 20110 Commercial Pro Truck Spreader WHEN ORDERING PARTS, PLEASE HAVE THE FOLLOWING INFORMATION AVAILABLE: * PRODUCT – ________________ * SERIAL NUMBER - _______________ * MODEL NUMBER - _______________ TYPE - _______________ * PART NUMBER WITH PAINT CODE * PART DESCRIPTION TELEPHONE - 1-800-222-8183 FAX - 1-660-747-8650 swisherinc.
