Replacement Part List

Item # Part # Description

1 10176 Lid - Hopper

2 NB181 Nut - Nyloc 5/16-18

3 NB579 Washer - 5/16 X 1 1/4 OD

4 10979* Support - RH Weldment

5 10976* Support - LH Weldment

6 NB501 Bolt - 5/16-18 X 1

7 NB556 Washer - USS Flat, 5/16

8 H1P Plug - 1 1/2 Cap, Square

When ordering replacement parts

*USE PAINT CODE: TK=BLACK

Step 4: Attaching the Hopper Support Tubes

• Attach the Support Tube Weldments (4 & 5) to the Hopper (12 on pg 4) by inserting the 5/16-18 X 1” Bolts (6)

through the smaller 5/16” Washers (7) and weldment, and into the holes on the side of the Hopper (12 on pg 4) as

shown.

• Place a 5/16 X 1 1/4” Washer (3) over each 5/16-18 X 1” Bolt (6) on the inside of the Hopper and thread the 5/16-18

Nuts (2) onto the 5/16-18 X 1” Bolts (6), tightening securely using a ½” socket wrench and ½” box end wrench.

• Tip: Item 8 is preassembled into the tube weldments.