Replacement Part List

7
Item # Part # Description
1 9855 Bolt - U, Sq 3/8-16 X 1 5/8 X 2 3/4
2 20135* Plate - Height Adjustment
3 13964 Bolt - Serrated Flange 3/8-16 X 1
4 NB182 Nut - Nyloc 3/8-16
5 20132* Weldment - Mount
6 NB272 Washer - SAE Flat 3/8
2” X 2” Receiver
Hitch Compatible
When ordering replacement parts
*USE PAINT CODE: TK=BLACK
Step 5: Assembling the Hitch Mount
• Using 9/16” socket wrench and a 9/16” box
end wrench, attach the Mount Weldment (5) to
the Height Adjustment Plate (2) using four 3/8-
16 X 1” Serrated Flange Bolts (3), four 3/8”
Washers (6) and four 3/8-16 Nuts (4), tightening
securely.
• Loosely assemble the four U-Bolts (1) to the
Height Adjustment Plate (2) using eight 3/8”
Washers (6) and eight
3/8-16 Nuts (4).
• Insert the Right and Left Support Tube
Weldments (4 & 5 on pg 6) through the U-Bolts
(1) and tighten the 3/8-16 Nuts (4) securely
using a 9/16” socket wrench.
Tip: Find an assistant to help
when attaching or removing
the Truck Spreader. Care
must be taken while lifting to
avoid personal injury or
equipment damage.
Alternate Hitch Assembly for Lower
Height:
• Using 9/16” socket wrench and a 9/16” box
end wrench loosely assemble the four U-Bolts
(1) to the Mount Weldment (5) using eight 3/8”
Washers (6) and eight
3/8-16 Nuts (4).
• Insert the Right and Left Support Tube
Weldments (4 & 5 on pg 6) through the U-Bolts
(1) and tighten the 3/8-16 Nuts (4) securely
using a 9/16” socket wrench.