Use and Care Manual
Table Of Contents
- Cover
- Limited Warranty
- Safety Precautions 1
- Saftey Precautions 2
- Assembly
- Operation 1
- Operation 2
- Operation 3
- Maintenance
- Troubleshooting
- Safety Decals
- Deck Leveling Detail
- Front Skirt Detail
- Hitch Detail
- Motor Base Detail
- Wheel Detail
- Height Adjust Detail
- Deck Detail
- Blade Driver Detail
- Engine Detail
- Idler Detail
- Belt Configuration
- Console Detail
- Wiring Diagram
- Fuel Tank Detail
- Carbon Canister Detail
- Battery Detail
- Battery Cable Assembly
- Hitch Positioning
- Slope Guide
- Ordering Information
ȴﴠﴠﴠﴠﴠﴠ
Item # Description Part #
1 Nut - Nyloc 1"-8 NB612
2 Washer - 1" X 2" X 14GA NB738
3 Pulley - Blade, 10.3125" 4846
4 Spacer - Pulley 21344
5 Bearing - Blade 4845
6 Shaft - Blade 18844
7
Nut - Nyloc 1/2"-13
NB281
8 Washer - USS Flat, 1/2" NB555
9 Blade Driver Housing 4858*
10 Bolt - 1/2"-13 X 2" NB509
11 Cover - Dust (If Equipped) 21372
12 Washer - 1" X 1 1/2" X 10GA NB614HT
13 Nut - Nyloc 3/4"-10 NB609
14 Weldment - Stump Jumper 4859*
15 Blade 10358
16 Washer - 3/4" X 1 1/4" X 18GA NB179
17 Bolt - 3/4"-10 X 2" 11431
18 Nut - Nyloc 1"-14 18850
19 Kit - Replacement, Blade Driver 18905
BLADE DRIVER ASSEMBLY
FIGURE 7
When ordering replacement parts
* = USE PAINT CODE: TK=BLACK
Note: The pulley, stump jumper, blades, blade hardware
and housing hardware are not included with the 18905
replacement blade driver kit.
15