Wall-Mount Sink INSTALLATION INSTRUCTIONS @SwissMadison #WellMadeForever www.swissmadison.com | 1-434-623-4766 | info@swissmadison.
WALL MOUNT SINK INSTALLATION INSTRUCTIONS PRIOR TO INSTALLATION: · Inspect sink to ensure no damages have occurred while in shipping. · Observe all plumbing and building codes in accordance with your state and local requirements. · All dimensions are nominal! Be sure to measure your sink prior to installation. · The step-by-step guidelines in the installation instructions are a general reference. Should there be any discrepancies, Swiss Madison cannot be held liable.
WALL MOUNT SINK Anchor INSTALLATION INSTRUCTIONS Metal Screw Plastic Gasket Metal Gasket Metal Nut 1. Drill two holes in the required position on the wall using a 14 mm masonry drill bit, to a depth of 75 mm. 2. Push an anchor into each hole. 3. Screw a fixing bolt into each fixing plug using a 8 mm spanner until the spanner contacts the wall. 4. Place the basin in position against the wall. Locating the fixing bolts through the holes in the rear of the basin.
WALL MOUNT SINK INSTALLATION INSTRUCTIONS HALF PEDESTAL WALL-MOUNT SHROUD INSTALLATION: 1. Slide shroud into place, then mark location of holes located on both sides of the shroud. 2. Pre-drill into wall and install achors. 3. Slide shroud into place and secure using same steps as when mounting the sink. Use cover caps to hide hardware. Do not overtighten, it may crack the ceramic.
® well made forever ONE YEAR LIMITED WARRANTY 1-434-MADISON (623-4766) www.swissmadison.com Swiss Madison® products are made with quality materials and excellent craftsmanship to provide our customers with beautiful, durable, long-lasting products.