Wall-Hung Toilet INSTALLATION INSTRUCTIONS Swiss Madison @SwissMadison #WellMadeForever www.swissmadison.com | 1-434-623-4766 | info@swissmadison.
WALL-HUNG TOILET INSTALLATION INSTRUCTIONS PRIOR TO INSTALLATION: · Inspect toilet to ensure no damages have occurred while in shipping. · Observe all plumbing and building codes in accordance with your state and local requirements. · All dimensions are nominal! Be sure to measure your toilet prior to installation. · The step-by-step guidelines in the installation instructions are a general reference. Should there be any discrepancies, Swiss Madison cannot be held liable.
WALL-HUNG TOILET INSTALLATION INSTRUCTIONS 1. Install Tank 2. Dry Fit Flange and Inlet Pipe 3. Determine Pipe Size 4. Cut Pipes · Before toilet bowl installation, a wood frame and commercial or residential tank system is required. · Install according to manufactuer’s instructions. · Apply lubricant on rubber washers of straight tube and connecting pipe, then insert into holes. · Draw lines on pipes as pictured below.
WALL-HUNG TOILET 5. Mount Toilet Bowl INSTALLATION INSTRUCTIONS · Apply lubricant to the joint surface on straight tube and connecting pipe. · Mount the toilet bowl to the wall. 6. Level and Attach Bowl · Attach bowl using the washers and bolts, make sure the bowl is level, then cover with included cap. · Fill any gaps with cement or sealant.
WALL-HUNG TOILET INSTALLATION INSTRUCTIONS TOILET SEAT INSTALLATION 2. Construct Hinges 1. Dissassemble · Insert screw and nut into the hole on the hinge. · Attach blind hole screw fixing to the bottom of screw. · Disassemble the cover cap and the hinge. Pull or 3. Attach Hinges · Insert hinges with blind hole screw fixings attached into holes on toilet bowl. · Lightly tighten hinges with a screwdriver too allow for later adjustment. 4.
WALL-HUNG TOILET INSTALLATION INSTRUCTIONS 5. Adjust and Attach Seat · Align seat to the hinges then firmly tighten the hinges. · Attach seat to the secure hinges. · Adjust seat to align to the bowl. TOILET SEAT USAGE · To remove, push middle button until you hear a “click”, then pull straight up. · To re-install, align hinge posts with reference marks on seat, then push down until your hear a “click”.
Swiss Madison ® ONE YEAR LIMITED WARRANTY 1-434-MADISON (623-4766) 19 Stults Road Dayton, NJ 08810 www.swissmadison.com Swiss Madison® products are made with quality materials and excellent craftsmanship to provide our customers with beautiful, durable, long-lasting products.
