Instructions / Assembly

3. Determine Pipe Size

· Apply lubricant on rubber washers of straight

tube and connecting pipe, then insert into holes.

· Draw lines on pipes as pictured below.

4. Cut Pipes

· Using the marked lines, cut the straight tube and

connecting pipe as instructed below.

· After cutting, be sure to chamfer cut edges.

Straight

tube

Connecting

pipe

+ 3mm

+ 5mm

— 2 —

2. Dry Fit Flange and Inlet Pipe

· Fully insert straight tube into cistern flushing outlet

then connect pipe into discharge outlet.

· Draw lines to mark the finished wall location on each

pipe as pictured below.

1. Install Tank

· Before toilet bowl installation, a wood frame and

commercial or residential tank system is required.

· Install according to manufactuer’s instructions.

WALL-HUNG TOILET INSTALLATION INSTRUCTIONS