Owner's manual

3. Menu Operation
Press “MENU” and it will display menu system
Revolve “OK” to select an item. The selected item will be highlighted display.
Press “OK” to enter the selected item.
Under menu system, press “MENU” to back to previous menu.
*The menu will automatically save and quit if it remains idle.
3.1 PICTURE submenu
The PICTURE submenu includes:
CONTRAST: 0-100 value adjustment
BRIGHTNESS: 0-100 value adjustment
HUE: 0-100 value adjustment
(Only available under CVBS NTSC input)
SATURATION: 0-100 value adjustment
SHARPNESS: 0-100 value adjustment
3.2 SYSTEM submenu
The SYSTEM submenu includes:
RATIO: Aspect ratio “16:9” / “4:3” selection
SCAN: “UNDERSCAN” / “OVERSCAN” selection
ZOOM: “OFF”, “ZOOM1” and “ZOOM2” selection
ZOOM1: Canon DSLR scale zoom-in
ZOOM2: Pixel to Pixel zoom-in
MARKER: Select and set the safe area scale from
80%, 85%, 90% and 95%.
FLIP: Select “ON” to flip the picture by 180°.
RESET: Select “YES” to recover all to factory setting.
3.3 OSD submenu
The OSD submenu includes:
LANGUAGE: Menu language selection
H-POSITION: Menu horizontal position (0-100)
adjustment, real-time preview and default value: 50.
V-POSITION: Menu vertical position (0-100)
adjustment, real-time preview and default value: 50.
DURATION: Menu timeout setting (5-60)
Set a time (in seconds) in which the menu will
automatically quit if remains idle. Default: 15.