Manual
Operation
Important notes:
• Never operate the product while it is in the packaging or rolled up.
• Do not cover the product while it is in use or cooling down.
• Remote control:
- Observe its max. range. Point it at the power adaptor when operating.
- Replace the battery if the product no longer responds to input.
a) Managing the power supply
• To supply power, connect the power adaptor to the mains.
- The power indicator light on the adaptor lights up blue.
• After use, disconnect the power adaptor from the mains.
The product does not have an on/off switch that disconnects it from the mains. To
completely shut off, disconnect the power adaptor from the mains.
b) Turning the lights on and off
Remote control: Press ON to turn on and OFF to turn off.
c) Adjust dimming
On the remote control, use the DIM+ and DIM- buttons to incrementally adjust dimming:
• Increase brightness: Press DIM+.
• Reduce brightness: Press DIM-.
d) Using light effects
The below table lists the available light effects.
1 Combination 5 Chasing/Flash
2 Waves 6 Slow Fade
3 Sequential 7 Twinkle/Flash
4 Slow-glow 8 Steady on
Activate light effects as follows:
• Power adaptor: Repeatedly press the button PRESS to toggle through the light effects.
• Remote control: Press the number corresponding to the light effect shown in the table.
e) Using the timer
The timer operates the product in periods of on (6 hours) and off (18 hours).
Study the below diagram to understand how the timer works after activation.
1 day 2 day
6h 6h18h
Activating and deactivating
When the timer is activated, the timer indicator light on the adaptor lights up green.
• Power adaptor: Hold down the button PRESS for 3 seconds to activate the timer. Hold it
down for 3 seconds to deactivate the timer.
• Remote control: Press TIMER to activate the timer. Press again to deactivate.
Care and cleaning
• Disconnect the product from the mains before cleaning or storing.
• Let the product cool down to ambient temperature before cleaning or storing.
• Remove batteries before storing to prevent leaking.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• Clean the product with a dry, bre-free cloth.
Important notes:
• LED lights cannot be replaced.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the house-
hold waste.
At the end of its service life, dispose of the product in accordance with applicable
regulatory guidelines.
b) (Rechargeable) batteries
Remove any inserted (rechargeable) batteries and dispose of them separately from
the product.
You as the end user are required by law (Battery Ordinance) to return all used (re-
chargeable) batteries. Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labeled with this symbol to indicate that
disposal in the domestic waste is forbidden. The designations for the heavy metals
involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable)
batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our
stores or wherever (rechargeable) batteries are sold.
You thus fulll your statutory obligations and contribute to the protection of the environment.
Technical data
a) Product
Decoration
Protection type .............................. IP44
Operating voltage ......................... 3 V/DC (one LED)
Power consumption ...................... max. 0.06 W (one LED)
Number of lights ........................... 120
Luminous colour ........................... Warm White
Colour temperature ....................... 2500 – 3000 K
LED life ......................................... 20000 hrs
Power cable length ....................... 5 m
Total length ................................... 7 m
Distance between lights ................ 10 cm
Operating conditions ..................... -20 to +40 °C / 0 – 100 % RH
Storage conditions ........................ -20 to +40 °C / 0 – 100 % RH
Weight .......................................... 292 g
Power adapter
Adapter model .............................. JT-EL/FC4.5V3.6W-H7-IP44
Protection type .............................. IP44
Input voltage ................................. 220 - 240 V/AC, 50/60 Hz
Output voltage .............................. 4.5 V/DC
Output current ............................... 800 mA
Output power ................................ 3.6 W
b) Remote control
Battery .......................................... 1x CR2025
Range ........................................... max. 8 m
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE. *2266353_634c54_v1_0720_02_jh_m_en_(1)