2011 (Windows)
Table Of Contents
- Symantec™ System Recovery 2011 User's Guide
- Technical Support
- Contents
- 1. Introducing Symantec™ System Recovery 2011
- 2. Installing Symantec System Recovery
- 3. Ensuring the recovery of your computer
- 4. Getting Started
- How to use Symantec System Recovery
- Starting Symantec System Recovery
- Configuring Symantec System Recovery default options
- Setting up general backup options
- Adjusting the effect of a backup on computer performance
- About enabling network throttling
- Adjusting default tray icon settings
- About managing file types and file extensions
- About using unique names for external drives
- Configuring default FTP settings for use with Offsite Copy
- Logging Symantec System Recovery messages
- Enabling email notifications for product (event) messages
- Setting up your first backup using Easy Setup
- Hiding or showing the Advanced page
- 5. Best practices for backing up your data
- 6. Backing up entire drives
- About defining a drive-based backup
- Defining a drive-based backup
- Drives options
- Related drives options
- Recovery point type options
- Backup destination options
- Offsite Copy Settings options
- Recovery point options
- Advanced Scheduling options
- About files that are excluded from drive-based backups
- About network credentials
- About running command files during a backup
- Command files options
- Advanced options for drive-based backups
- Backup time options
- Compression levels for recovery points
- Running a one-time backup from Symantec System Recovery
- About running a one-time backup from Symantec System Recovery Disk
- About Offsite Copy
- How Offsite Copy works
- 7. Backing up files and folders
- 8. Running and managing backup jobs
- Running an existing backup job immediately
- Adjusting the speed of a backup
- Stopping a backup or a recovery task
- Verifying that a backup is successful
- Editing backup settings
- Enabling event-triggered backups
- Editing a backup schedule
- Turning off a backup job
- Deleting backup jobs
- Adding users who can back up your computer
- Configuring access rights for users or groups
- 9. Backing up remote computers from your computer
- 10. Monitoring the status of your backups
- About monitoring backups
- About the icons on the Home page
- About the icons on the Status page
- Configuring Symantec System Recovery to send SNMP traps
- About customizing the status reporting of a drive (or file and folder backups)
- Viewing drive details
- Improving the protection level of a drive
- About using event log information to troubleshoot problems
- 11. Exploring the contents of a recovery point
- 12. Managing backup destinations
- About backup destinations
- About backup methods
- Cleaning up old recovery points
- Deleting a recovery point set
- Deleting recovery points within a set
- Making copies of recovery points
- Defining a virtual conversion job
- Running an existing virtual conversion job immediately
- Viewing the properties of a virtual conversion job
- Viewing the progress of a virtual conversion job
- Editing a virtual conversion job
- Deleting a virtual conversion job
- Running a one-time conversion of a physical recovery point to a virtual disk
- About managing file and folder backup data
- Automating the management of backup data
- Moving your backup destination
- 13. Recovering files, folders, or entire drives
- About recovering lost data
- Recovering files and folders by using file and folder backup data
- Recovering files and folders by using a recovery point
- About opening files and folders stored in a recovery point
- About finding the files or folders you want
- Recovering a secondary drive
- Customizing the recovery of a drive
- About restoring a computer from a remote location by using LightsOut Restore
- 14. Recovering a computer
- About recovering a computer
- Booting a computer by using the Symantec System Recovery Disk
- Preparing to recover a computer by checking the hard disk for errors
- Recovering a computer
- Recovering a computer from a virtual disk file
- About recovering to a computer with different hardware
- Recovering files and folders by using Symantec System Recovery Disk
- Exploring files and folders on your computer by using Symantec System Recovery Disk
- About using the networking tools in Symantec System Recovery Disk
- Viewing the properties of a recovery point
- Viewing the properties of a drive within a recovery point
- About the Support Utilities
- 15. Copying a hard drive
- 16. Using the Symantec System Recovery Granular Restore Option
- About the Symantec System Recovery Granular Restore Option
- Best practices when you create recovery points for use with the Granular Restore Option
- Starting the Granular Restore Option
- What you can do with the Granular Restore Option
- Opening a specific recovery point
- Restoring a mailbox
- Restoring an email folder
- Restoring an email message
- Restoring SharePoint documents
- Restoring files and folders
- A. Using a search engine to search recovery points
- B. Backing up databases using Symantec System Recovery
- C. Backing up Active Directory
- D. Backing up Microsoft virtual environments
- E. Using Symantec System Recovery 2011 and Windows Server 2008 Core
- Index
Note: You cannot run command files that include a graphical user interface, such
as notepad.exe. Running such command files causes the backup job to fail.
You can run a command file during any of the following stages during the creation
of a recovery point:
■ Run before snapshot creation
■ Run after snapshot creation
■ Run after recovery point creation
See
“Command files options” on page 84.
The most common use for running command files is to stop and restart
non-VSS-aware databases that you want to back up.
To use a Visual Basic script file (.vbs) during a backup, you can create a batch file
(.bat) to run the script. For example, you can create a batch file called Stop.bat
that contains the following syntax:
Cscript script_filename.vbs
Make sure that Cscript precedes the file name of the Visual Basic script.
Warning: The command files cannot depend on any user interaction or have a
visible user interface. You should test all command files independently of Symantec
System Recovery before you use them during a backup.
When the backup begins, the command file is run during the specified stage. The
backup is stopped if an error occurs while a command file is running. Or, the
backup is stopped if the command file does not finish in the time you specified
(regardless of the stage). In either case, the command file is terminated (if
necessary), and the error information is logged and displayed.
See
“Defining a drive-based backup” on page 74.
See “Running a one-time backup from Symantec System Recovery” on page 93.
Command files options
The following table describes the options that are available in the Command file
panel.
Backing up entire drives
Defining a drive-based backup
84