Specification Sheet

ManualsBrandsSymmons ManualsPlumbingDia Collection 3500-CYL-B-BBZ-REB-TRM Wall Mounted Shower Valve Trim with Lever Handle in Brushed Bronze

Dia

Feature Highlights Options/Modiﬁcations

S-3500-CYL-B-TRM, S3500CYLBTRMTC

Shower Valve Trim

Speciﬁcation Submittal

• Dia Shower Valve Trim

• Requires Temptrol

Pressure Balancing Shower Valve

• Integral volume control

• Metal lever handle

• Showerhead not included

• Tub spout not included

• Components shall be metal and nonmetallic construction,

plated in standard Polished Chrome ﬁnish

• Available with TA-10 ﬂow control spindle and T-12A cap

assembly for Temptrol valve bodies installed with Test Cap

(order p/n S3500CYLBTRMTC)

• ASME A112.18.1/CSA B125.1

Model Numbers

☐

S-3500-CYL-B-TRM

Shower Valve Trim with integral volume control,

Temptrol Pressure Balancing Shower Valve ordered sepa-

rately

☐

S3500CYLBTRMTC

Shower Valve Trim with integral volume control,

TA-10 ﬂow control spindle and T-12A cap assembly, must

order Temptrol valve with Test Cap

Compliance

Note: Append appropriate -sux to model number.

☐

Delete

Sux B

Chrome plastic escutcheon on valve with

color graphic/indicators in place of standard

brass escutcheon

☐

-REB Rebuild trim kit, includes TA-10 and TA-4

☐

-BBZ Brushed Bronze ﬁnish

☐

-MB Matte Black ﬁnish

☐

-STN Satin Nickel ﬁnish

☐

-STN Satin Nickel ﬁnish

☐

-L7 Less handle

Summary of content (2 pages)

PAGE 1
Dia ® S-3500-CYL-B-TRM, S3500CYLBTRMTC Shower Valve Trim Specification Submittal Feature Highlights • • • • • • • • Dia Shower Valve Trim Requires Temptrol® Pressure Balancing Shower Valve Integral volume control Metal lever handle Showerhead not included Tub spout not included Components shall be metal and nonmetallic construction, plated in standard Polished Chrome finish Available with TA-10 flow control spindle and T-12A cap assembly for Temptrol valve bodies installed with Test Cap (order p/n S3500C
PAGE 2
Dimensions Measurements A B C D E A C B D 9-1/4", 235 mm 5-3/4" 146 mm 4-1/2", 114 mm 3-1/4", 83 mm Rough-in 2-3/8" ± 1/2", 60 mm ± 13 mm E FLOOR Notes: 1) Valve body and piping not included and shown as reference only. 2) Plaster shield (p/n T-176) for dry wall, plaster or other type walls 1/2" or greater. 3) All dimensions measured from nominal rough-in (see E as reference). 4) Dimensions subject to change without notice. Symmons Industries, Inc.