Specification

ManualsBrandsSymmons ManualsPlumbing SuppliesMaxline Thermostatic Mixing Valve

MaxLine

Model Numbers Feature Highlights

8210CK

Thermostatic Mixing Valve

Speciﬁcation Submittal

☐

8210CK Thermostatic Mixing Valve

Note: Append appropriate sux to model

number.

Options/Modiﬁcations

☐

B Wall cabinet in white enamel ﬁnish

including wall mounting bracket

☐

D 3/8" compression ﬁtting to allow

water bypass for hot and cold

supply faucet

☐

NI Rough Nickel ﬁnish

☐

T Stainless steel cabinet in place of

standard white cabinet

• 3/8" compression connections

• Integral checks

• Stainless steel strainers for protection against

suspended particles in supply lines

• Thermal cartridge

• Vandal resistant

• Minimum ﬂow rate 0.25 gpm (0.95L/min)

Inlet water temperature:

HOT inlet range 120°F - 180°F (48.9°C - 82.2°C)

COLD inlet range 39°F - 80°F (3.9°C - 26.7°C)

Temperature control range:

59°F - 115°F (15°C - 46°C)

Minimum supply pressure: 20 psi (138 kPa)

Maximum supply pressure: 125 psi (862 kPa)

Inlet to outlet temperature dierential: 10°F (5.55°C)

*According to US Senate bill S.3874, the term "lead free" is

deﬁned as follows: "not more than a weighted average of

0.25 percent lead when used with respect to the wetted

surfaces of pipes, pipe ﬁttings, plumbing ﬁttings, and

ﬁxtures."

Compliance

Architectural/Engineering Speciﬁcation

-ASME A112.18.1/CSA B125.1

-ASSE 1017/CSA B125.3

-ASSE 1070/CSA B125.3

-NSF/ANSI 372

-NSF/ANSI/CAN 61: Q<1

-CSA B125.3

Limited Lifetime - to the original end

purchaser in consumer/residential

installations.

10 Years - for commercial/industrial

installations. Refer to

www.symmons.com/warranty for

complete warranty information.

Warranty

Symmons MaxLine ________ TMV, 2.06GPM@10PSI, minimum thermostatically controlled ﬂow rate 0.25GPM. Solid

brass body, integral spring checks, stainless steel debris strainer, 3/8” compression ports. Temperature control range

of 59F-115F degrees. Vandal-resistant cap. Mounting bracket included. 10-Year Commercial Warranty. 1070/1017 and

A112.18.1 certiﬁed. Available options: “B - Wall cabinet white”, “D - Cold water bypass”,

“NI - Rough Nickel Finish” and “T – Stainless Steel cabinet.”.

Summary of content (2 pages)

PAGE 1
MaxLine® 8210CK Thermostatic Mixing Valve Specification Submittal Model Numbers Feature Highlights ☐ 8210CK • • • Thermostatic Mixing Valve Options/Modifications ☐ B Wall cabinet in white enamel finish including wall mounting bracket ☐ D 3/8" compression fitting to allow water bypass for hot and cold supply faucet ☐ NI ☐ T Rough Nickel finish Stainless steel cabinet in place of standard white cabinet Note: Append appropriate suffix to model number.
PAGE 2
Flowrates Table 1: Flow Rate - gpm (L/min) Valve Model Size Connection 8210CK 3/8" (10 mm) Pressure Differential - psi (kPa) 10 psi 20 psi 25 psi 30 psi 45 psi (69 kPa) (138 kPa) (172 kPa) (207 kPa) (310 kPa) 2.06 gpm 2.74 gpm 3.11 gpm 3.38 gpm 4.22 gpm (7.8 L/min) (10.4 L/min) (11.8 L/min) (12.8 L/min) (16.0 L/min) Min. Flow Rate 5 psi (34 kPa) 0.25 gpm 1.32 gpm (0.95 L/min) (5.