Installation Sheet

ManualsBrandsSymmons ManualsBathroom Sink FaucetsCanterbury Polished Chrome 2-Handle Widespread WaterSense Bathroom Sink Faucet

Non-

Removable Removable

stopper stopper

Quick Install Guide Canterbury Widespread Lavatory Faucet, SLW-4512

Flush water supply lines

Step 10

Step 1

Attach faucet spout

Step 3

Attach faucet handles

Step 2

Attach pivot rod to drain body

Step 7

Connect lift rod, clevis strap,

pivot rod and adjust linkage

Step 8

Install stopper and

set eye position

Step 6

Attach drain body to drain trap

Step 9

Step 4

SConnect water supply lines

Attach control valves to sink

Step 1

Fasten drain body and

tail piece to sink

Step 5

Plumbers

Putty

Pipe

Sealant

 Need Help?

Contact Symmons customer service at

P: (800) 796-6667, F: (800) 961-9621

Email: customerservice@symmons.com

Monday - Friday 7:30 am - 7:00 pm EST

 Please check Symmons website

for technical help, the latest product

information and warranty policy.

www.symmons.com/service

Tools & Materials

Installation and Service Instructions

Canterbury™

Widespread Lavatory Faucet SLW-4512

Model Numbers

SLW-4512

Lavatory faucet with

pop-up drain

Alternate Finish Code

append to part numbers when applicable

-STN

Satin Nickel

Chrome (standard)

Summary of content (4 pages)

PAGE 1
Canterbury™ Widespread Lavatory Faucet SLW-4512 Installation and Service Instructions Tools & Materials Model Numbers  Need Help? Contact Symmons customer service at P: (800) 796-6667, F: (800) 961-9621 Email: customerservice@symmons.
PAGE 2
Installation Installation Instructions Instructions Caution: If replacing an older faucet ensure water supply is turned OFF before removing. Then open faucet valves to Step 4 Connect water supply lines relieve water pressure. ■■ Apply pipe sealant on both flex hose adapters and thread into sides of tee. Step 1 Attach control valves to sink ■■ Thread center of tee onto end of spout. Note: This may require about 4 inches of clearance to rotate.
PAGE 3
Step 6 Install stopper and set eye position Step 10 Flush water supply lines Stopper can be removable stopper or non-removable flange determined by position of eye hole when non inserting pivot rod. removable removable ■■ Insert stopper through flange opening and position eye hole. Thoroughly flush supply lines to prevent foreign remove matter, i.e. copper chips, aerator sand, etc. from damaging the sealing surface inside control valves.
PAGE 4
Dimensions Canterbury Widespread Lavatory Faucet, SLW-4512 4" (102 mm) min 3-1/8" (80 mm) 8" (203 mm) min 16" (406 mm) max 5-15/16" (151 mm) 2-7/8" 2" dia 73 mm 1-7/16" (36 mm) (51 mm) 13/16" dia. (21 mm) Hole size 1-1/8" (29 mm) min 1-1/2" (38 mm) max Deck thickness 1-3/8" (35 mm) max 1" dia. (25 mm) Hole size 1-1/16" (27 mm) min 1-7/16" (37 mm) max Flexible hose 2-3/8" dia (60 mm) ~ 5/8" (16 mm) Note: Dimensions subject to change without notice.