Installation Guide

Step 6 Install stopper and pivot rod
Step 7 Connect lift rod and adjust linkage
Step 8 Connect supply lines
Care of faucet finish
Clean finish area by using mild soap and water or non-abrasive
cleaner and then rinse immediately. A non-abrasive wax may be
used to preserve finish area.
Valve cartridge replacement
Step 9 Flush water supply lines
CCW=OFF
OFF
CW=OFF
OFF
Replace handles
Lead free brass valve cartridges
(reference replacement parts table)
HOT: OFF=CW
0 or 2 grooves
COLD:
OFF=CCW
1 or 3 grooves
depending on supplier
17 mm deep
socket wrench
1 2 3
1/2" (13 mm)
Sealant
non
removable
removable
1
2
HOT
COLD
supply hoses
not included
Page 3