Installation Guide

All installations can vary depending on how your previous faucet
was installed. Necessary supplies to install your faucet are not all
included: however they are available wherever plumbing supplies
are sold. When choosing your installation supplies, make sure
they are IAPMO and / or CSA approved products.
Things You May Need
2
1
3
Shut off water supply. Remove old faucet. Clean sink
surface in preparation for new faucet.
Attach Spout to Valve
Feed hose assembly through spout and hub. Attach
sprayer to end of hose to keep hose in place. Rotate
spout assembly to ensure smooth operation.
Mount Faucet to Deck
Place flange on bottom of hub. Insert faucet through
mounting holes in sink. Your faucet is designed for a hole
diameter of 1 3/8" +/- 1/4"(35mm+/- 6mm) and a deck
thickness of up to 2 1/2" (64mm).
Page 2