Installation Guide

5
4
7
Install rubber washer, metal washer and nut onto the
mounting shank.
Hose Installation
Align block (1) onto hose. Install quick connect onto spray
hose. Push quick connect firmly onto outlet hose tab.
Install weights onto spray hose. Locate the weights 24"
from the underside of the sink deck.
24"
Faucet Operation and Inspection
Turn on hot and cold water supplies. Pull the hose
assembly out of the spout and remove aerator(1) with
wrench(2). Be sure to hold the end of the hose down into
the sink and turn faucet handle to the mixed position.
Flush water lines for one minute. Check for leaks.
Re-tighten if necessary, but do not overtighten. Reinstall
the spray head tight.
1
2
Connect to water supplies (HOOK-UPS NOT PROVIDED)
Note: Refer to local plumbing codes for permissible types
of water supply connectors.
(B)
(A)
6
Page 3