Synology NAS DS1520+ Hardware Installation Guide
Table of Contents Chapter 1: Before You Start Package Contents Synology DS1520+ at a Glance LED Indicator Table Hardware Specification Optional Accessories Spare Parts Safety Instructions 3 4 5 6 7 7 8 Chapter 2: Hardware Setup Tools and Parts for Component Installation Install Drives Start Up Your Synology NAS Remove a Memory Module from Synology NAS 9 9 11 12 Chapter 3: System Maintenance Initial Troubleshooting Guide 14 Chapter 4: Install DSM on Synology NAS Install DSM with Web Assistant Learn Mor
1 Chapter Before You Start Thank you for purchasing this Synology product! Before setting up your new Synology NAS, please check the package contents to verify that you have received the items below. Also, make sure to read the safety instructions carefully to avoid harming yourself or damaging your Synology NAS. Note: All images below are for illustrative purposes only, and may differ from the actual product. Package Contents Main unit x 1 AC power cord x 1 AC power adapter x 1 Screws for 2.
Synology DS1520+ at a Glance 1 11 2 3 4 5 7 12 8 13 6 No. 1 4 Article Name 9 Location 10 Description 1 Status Indicator Displays the status of the system. For more information, see "LED Indicator Table." 2 Drive Status Indicator Displays the status of each drive. For more information, see "LED Indicator Table." 3 Drive Tray Lock 4 USB 3.0 Port 5 Power Button 6 Drive Tray Install drives (hard disk drives or solid state drives) here.
LED Indicator Table LED Indicator Color Status Description Green Static Volume normal Volume degraded/Volume crashed STATUS Orange Blinking Volume not created DSM not installed Off Green Disk 1-5 Orange HDD hibernation Static Drive ready and idle Blinking Accessing drive Static Drive error/Port disabled1 Off Blue Power No internal drive Static Powered on Blinking Booting up/Shutting down Off Rear LAN (on left side of jack) Green Powered off Static Network connected Blinking Ne
Hardware Specification Item Compatible Drive Type Maximum Internal Raw Capacity External Port DS1520+ • 3.5"/2.5" SATA x 5 • M.2 2280 NVMe SSD x 2 80 TB (5 x 16 TB HDD) • USB 3.0 x 2 • eSATA x 2 LAN Port 1GbE (RJ-45) x 4 Size (H x W x D) (mm) 166 x 230 x 223 Weight (kg) 2.62 Supported Client File System • Windows 7 onwards • macOS 10.
Optional Accessories With Synology accessories, you can customize your Synology NAS to fit different business environments without worrying about compatibility and stability. Visit www.synology.com/compatibility for more information. • Expansion Unit Model Name Picture Description 5-bay 2.5"/3.5" SATA expansion DX517 Note: Your Synology NAS supports up to two expansion units. Spare Parts Visit www.synology.com/products/spare_parts if you need to replace system fans, disk trays, or power supply units.
Safety Instructions Keep away from direct sunlight and from chemicals. Make sure the environment does not experience abrupt changes in temperature or humidity. Place the product right side up at all times. Do not place near any liquids. Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or aerosol cleaners. To prevent the unit from falling over, do not place on carts or any unstable surfaces. The power cord must plug in to the correct supply voltage.
2 Chapter Hardware Setup Tools and Parts for Component Installation Please prepare the following tools and parts before setting up your Synology NAS: • A screwdriver (only for 2.5" drives) • At least one 3.5" or 2.5" SATA drive (please visit www.synology.com/compatibility for compatible drive models) Warning: If you install a drive that contains data, the system will format the drive and erase all existing data. Please back up any important data before installation.
3 Insert the loaded drive tray into the empty drive bay and push it back until you hear a click when the tray is locked into place. 4 Repeat the steps above to install the other drives you have prepared. 5 Drives are numbered as shown below. 1 2 34 5 Note: If you plan to create a RAID volume, we recommend installing drives of identical size to make the best use of drive capacity.
Start Up Your Synology NAS 1 Use the LAN cable to connect the Synology NAS to your switch, router, or hub. 2 Connect one end of the AC power adapter to the power port of your Synology NAS. Connect one end of the AC power cord to the AC power adapter, and the other to the power outlet. 1 2 3 Press the power button to turn on your Synology NAS. Congratulations! Your Synology NAS is now online and detectable from a network computer.
Remove a Memory Module from Synology NAS Follow the steps below to remove, install, or check a memory module on your Synology NAS. To remove the memory module 1 Shut down your Synology NAS. Disconnect all cables from your Synology NAS to prevent possible damage. 2 Remove the hard drive trays from the drive bays. The memory slot is located on the inner right side of your Synology NAS. Note: When you remove the drive trays, sensitive internal components are exposed.
To install the memory module 1 Follow step 1 and 2 of the "To remove the memory module" section to shut down your Synology NAS, disconnect the cables and remove the drive trays. 2 Insert the new memory module into the empty slot: a Align the small gap between the gold connectors of the memory module with the notch on the empty slot. Insert the memory module into the slot. Make sure that the module is properly inserted. b Gently push down the memory module until you hear a click.
3 Chapter System Maintenance Initial Troubleshooting Guide We have selected several helpful articles on frequently asked questions to help you perform initial troubleshooting on your Synology NAS.
4 Chapter Install DSM on Synology NAS After hardware setup is completed, please install DiskStation Manager (DSM) – Synology's browser-based operating system – on your DS1520+. Install DSM with Web Assistant Your DS1520+ comes with a built-in tool called Web Assistant that helps you download the latest version of DSM from the Internet and install it on your DS1520+. To use Web Assistant, please follow the steps below. 1 Power on your DS1520+.
SYNOLOGY, INC. END USER LICENSE AGREEMENT IMPORTANT–READ CAREFULLY: THIS END USER LICENSE AGREEMENT ("EULA") IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR A LEGAL ENTITY) AND SYNOLOGY, INC. ("SYNOLOGY") FOR THE SYNOLOGY SOFTWARE INSTALLED ONTO THE SYNOLOGY PRODUCT PURCHASED BY YOU (THE "PRODUCT"), OR LEGALLY DOWNLOADED FROM WWW.SYNOLOGY.COM, OR ANY OTHER CHANNEL PROVIDED BY SYNOLOGY ( "SOFTWARE").
request. Section 11. Disclaimer of Warranties. EXCEPT AS EXPRESSLY SET FORTH ABOVE, THE SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. SYNOLOGY AND ITS SUPPLIERS HEREBY DISCLAIM ALL OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, ARISING BY LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR USE, TITLE AND NONINFRINGEMENT, WITH REGARD TO THE SOFTWARE.
SYNOLOGY, INC.LIMITED PRODUCT WARRANTY THIS LIMITED WARRANTY ("WARRANTY") APPLIES TO THE PRODUCTS (AS DEFINED BELOW) OF SYNOLOGY, INC. AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICA CORP, (COLLECTIVELY, "SYNOLOGY"). YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS WARRANTY BY OPENING THE PACKAGE CONTAINING AND/OR USING THE PRODUCT.
3.3 Warranty Support and Exclusive Remedy. If Customer gives notice of noncompliance with any of the warranties set forth in Section 3.
the Synology end user license agreement accompanying any Software furnished by Synology or an authorized Synology distributor or reseller; and (b) not attempt to reverse engineer any Product or component thereof or accompanying Software or otherwise misappropriate, circumvent or violate any of Synology's intellectual property rights. 5.2 Assignment. Customer will not assign any of its rights under this Warranty directly, by operation of law or otherwise, without the prior written consent of Synology. 5.
FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
この装置は、クラス B 機器です。この装置は、住宅環境で使用することを 目的 としていますが、この装置がラジオやテレビジョン受信機に近接して使 用され ると、受信障害を引き起こすことがあります。 取扱説明書に従って正しい取り扱いをして下さい。 VCCI 一 B
