User's Manual

5
Chapter 1: Before You Start
LED Indicator Table
LED Indicator Color Status Description
STATUS
Green Static Volume normal
Orange Blinking
Volume degraded/Volume crashed
Volume not created
DSM not installed
O󰀨 HDD hibernation
Disk 1-5
Green
Static Drive ready and idle
Blinking Accessing drive
Orange Static Drive error/Port disabled
1
O󰀨 No internal drive
Power
Blue
Static Powered on
Blinking Booting up/Shutting down
O󰀨 Powered o󰀨
Rear LAN
(on left side of jack)
Green
Static Network connected
Blinking Network active
O󰀨 No network
Rear LAN
(on right side of jack)
Green Static 1 Gbps connection
Orange Static 100 Mbps connection
O󰀨 10 Mbps connection/No network
Note:
Model specications are subject to change without notice. Please refer to
www.synology.com
for the latest information.
1
Please try to restart your Synology NAS or re-insert the drives, then run the HDD/SSD manufacturer's diagnostic tool to check the health status
of the drives. If you can sign in to DSM, please run the built-in S.M.A.R.T. test to scan the drives. If the problem remains unresolved, please
contact Synology Technical Support for help.