Synology DiskStation DS214se Quick Installation Guide Synology_QIG_DS214se_20130820
Table of Contents Chapter 1: Before You Start Package Contents .............................................................................................................................................................. 3 Synology DiskStation at a Glance .................................................................................................................................... 4 Safety Instructions ..................................................................................................
Chapter Chapter 1: 1 Before You Start Thank you for purchasing this Synology product! Before setting up your new DiskStation, please check the package contents to verify that you have received the items below. Also, make sure to read the safety instructions carefully to avoid harming yourself or damaging your DiskStation.
Synology DiskStation at a Glance 4 No. Item Location Description 1) Status Indicator 2) LAN Indicator 3) Disk Indicator 4) Power Button 5) Fan Disposes of excess heat and cools the system. If the fan malfunctions, the DiskStation will emit a beeping sound. 6) USB 2.0 Port Connect external hard drives, USB printers, or other USB devices to your DiskStation here. 7) Reset Button 1.
Safety Instructions Keep away from direct sunlight and from chemicals. Make sure the environment does not experience abrupt changes in temperature or humidity. Place the product right side up at all times. Do not place near any liquids. Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or aerosol cleaners. To prevent the unit from falling over, do not place on carts or any unstable surfaces. The power cord must plug in to the correct supply voltage.
Chapter Chapter 2: Hardware Setup Tools and Parts for Hard Disk Installation A screwdriver At least one 3.5” or 2.5” SATA hard disk (please visit www.synology.com for compatible hard disk models.) Warning: If you install a hard disk that already contains data, the system will format the hard disk and erase all data. If you need the data in the future, please back it up before installation. Install Hard Disks 1 Push the upper case in the direction as shown below. Lift the upper case and set it aside.
b Slide the 2.5" Disk Holder into the hard drive bay, and push it all the way until the hard disk is firmly connected to the SATA connector. Secure the Disk Holder with the provided screws. 3 Repeat the steps above to install the other hard disk if you have prepared one. 4 The position of hard disks is as follows: Note: If you want to create a RAID volume, it is recommended that all installed hard disks are of the same size to make the best use of hard disk capacity.
Chapter Chapter 3: Install DSM on DiskStation After hardware setup is finished, please install DiskStation Manager (DSM) – Synology’s browser-based operating system – on your DiskStation. Install DSM with Web Assistant Your DiskStation comes with a built-in tool called Web Assistant that helps you download the latest version of DSM from the Internet and install it on your DiskStation. To use Web Assistant, please follow the steps below. 1 Power on the DiskStation.
Appendix A Specifications AppendixA: Item DS214se Internal HDD 3.5" or 2.5" SATA(II) x 2 Max. Capacity 8TB (2 x 4TB hard drives) External HDD Interface USB 2.0 x 2 LAN Port Gigabit x 1 Size (H x W x D) (mm) 165 x 100 x 225.5 Weight (kg) 0.87 ‧Windows XP onward Supported Clients ‧Mac OS X 10.5 onward ‧Ubuntu 9.04 onward Max. User Accounts 512 Max. Group Accounts 128 Max. Shared Folders 256 Max.
Appendix B LED Indicator Table AppendixB: LED Indicator STATUS Color Status Description Green Static Volume Normal Static Available volume space < 1GB or 1% Orange Blinking Off Front LAN Green DISK 1~2 Orange Static Network connected Blinking Network active No network Static Disk ready Blinking Accessing disk Static Disk error Off Power Blue HDD hibernation / No internal disk Static Powered on Blinking Booting up or shutting down Off Rear LAN (on upper side of jack) Or
SYNOLOGY, INC. END USER LICENSE AGREEMENT IMPORTANT–READ CAREFULLY: THIS END USER LICENSE AGREEMENT ("EULA") IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR A SINGLE ENTITY) AND SYNOLOGY, INC. AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICAN CORP AND SYNOLOGY UK LTD., (COLLECTIVELY, "SYNOLOGY") FOR ANY SYNOLOGY SOFTWARE, TOGETHER WITH ANY OTHER ASSOCIATED FIRMWARE, MEDIA, PRINTED MATERIALS AND "ONLINE" OR ELECTRONIC DOCUMENTATION (COLLECTIVELY, THE "SOFTWARE") AVAILABLE FOR DOWNLOAD AT WWW.
INABILITY TO USE THE SOFTWARE OR OTHERWISE UNDER OR IN CONNECTION WITH THIS EULA OR THE SOFTWARE, WHETHER BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHER THEORY EVEN IF SYNOLOGY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Section 13. Limitation of Liability.
SYNOLOGY, INC. LIMITED PRODUCT WARRANTY THIS LIMITED WARRANTY ("WARRANTY") APPLIES TO THE PRODUCTS (AS DEFINED BELOW) OF SYNOLOGY, INC. AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICA CORP AND SYNOLOGY UK LTD., (COLLECTIVELY, "SYNOLOGY"). YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS WARRANTY BY OPENING THE PACKAGE CONTAINING AND/OR USING THE PRODUCT. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE PRODUCT.
Customer, whichever period is longer Any Product found by Synology to be non-defective will be returned to Customer. 2.6 Support. During the Warranty Period, Synology will make available to Customer the support services. Following the expiration of the applicable Warranty Period, support for Products may be available from Synology upon written request. 2.7 Exclusions.
or the relationship between Customers residing within the United States and Synology will be resolved exclusively and finally by arbitration under the current commercial rules of the American Arbitration Association, except as otherwise provided below. The arbitration will be conducted before a single arbitrator, and will be limited solely to the dispute between Customer and Synology.