User Manual

After hardware setup is nished, please install DiskStation Manager (DSM) – Synology’s browser-based
operating system – on your DS220j.
Install DSM with Web Assistant
Your DS220j comes with a built-in tool called
Web Assistant
that helps you download the latest version of DSM
from the Internet and install it on your DS220j. To use Web Assistant, please follow the steps below.
1
Power on your DS220j.
2 Open a web browser on a computer connected to the same network as the DS220j.
3 Enter either of the following into the address bar of your browser:
a
nd.synology.com
b synologynas:5000
4
Web Assistant will be launched in your web browser. It will search for and nd the Synology NAS within the
local network. The status of the DS220j should be
Not Installed.
5
Click
Connect
to start the setup process and follow the onscreen instructions.
Note:
1. The Synology NAS must be connected to the Internet to install DSM with Web Assistant.
2. Suggested browsers: Chrome, Firefox.
3. Both the Synology NAS and the computer must be in the same local network.
6 If you accidentally leave the installation process before it is nished, log in to the DSM as admin (default
administrative account name) with the password left blank.
Learn More
Congratulations! Your DS220j is now ready for action. For more information or online resources about your
DS220j, please visit
www.synology.com
.
Install DSM on Synology NAS
4
13
Chapter