Quick Installation Guide

LED Indicator Color Status Description
Disk 1-4
Green
Static Drive ready and idle
Blinking Accessing drive
Orange Static Drive error / Port disabled
1
Off No internal drive
Power
Blue
Static Powered on
Blinking Booting up / Shutting down
Off Powered off
LAN
Green
Static Network connected
Blinking Network active
Off No network
STATUS
Green Static Volume normal
Orange Blinking
Volume degraded / Volume crashed
Volume not created
DSM not installed
Off HDD hibernation
Note:
Model specications are subject to change without notice. Please refer to
www.synology.com
for the latest information.
LED Indicator Table
B
12
Appendix
1
Please try to restart your DiskStation or re-insert the drive(s), and then run the HDD/SSD manufacturer's diagnostic tool to check the
health status of the drive(s). If you can log into DSM, please run the built-in S.M.A.R.T. test to scan the drive(s). If the problem remains
unresolved, please contact Synology Technical Support for help.