Quick Installation Guide

Chapter 2: Hardware Setup

Load drives in the drive trays.

•

For 3.5” drives:

Place the drive in the drive tray. Then tighten the screws to secure the drive in place.

•

For 2.5” drives:

Place the drive in the blue area (shown below) of the drive tray. Turn the tray upside down

and tighten the screws to secure the drive in place.

Insert the loaded drive tray into the empty drive bay.

Note:

Make sure the drive tray is completely inserted. Otherwise, the drive might not be able to function properly.

Repeat the steps above to install all prepared drives.