Quick Installation Guide

9
Chapter 2: Hardware Setup
8
Close the back cover. Replace and tighten the 4 screws you removed in step 1.
Note:
If you want to create a RAID volume, we recommend that all installed drives are of the same size to make the
best use of drive capacity.
Start Up Your DiskStation
1
Connect the AC adapter to the power port of the DiskStation. Connect one end of the AC power cord to the AC
power adapter, and the other to the power outlet.
2
Use the LAN cable to connect the DiskStation to your switch, router, or hub.
3
Press your power button to turn on your DiskStation.
Your DiskStation is now online and detectable from a network computer.