User's Manual

13
Chapter 2: Hardware Setup
•
For 2.5” drives:
Place the drive in the drive tray. Turn the tray upside down and tighten screws into the four
spots indicated below to secure the drive in place.
3
Insert the loaded drive tray into the empty drive bay.
RS4021xs+
Note:
Make sure that the drive tray is completely inserted. Otherwise, the drive might not function properly.
4
Push the handle inward to secure the drive tray.
5
Push the switch to the left on the drive tray handle to lock the drive tray.
RS4021xs+
6
Repeat the steps above to install the other drives you have prepared.
7
Drives are numbered as shown below.
1 2 43
5
6
7
8
9 10 1211
13 15 16
14
Note:
If you plan to create a RAID volume, we recommend installing drives of identical size to make the best
use of drive capacity.