User's Manual

8
Chapter 1: Before You Start
Other LED Indicators
LED Indicator Color Status Description
DRIVE status
Green
Static Drive ready and idle
Blinking Accessing drive
Red Static Drive error/Port disabled
1
O󰀨 No internal Drive
ALERT
Orange Blinking System error
2
O󰀨 System normal
Rear PSU status
Green Static Power supply unit normal
Red Static Power supply unit fail/No power supply
O󰀨 Power supply unit o󰀨
Rear 1GbE LAN
(on left side of jack)
Green
Static Network connected
Blinking Network active
O󰀨 No network
Rear 1GbE LAN
(on right side of jack)
Green
Static
1 Gbps connected
Orange 100 Mbps connected
O󰀨 10 Mbps connected/No network
Rear 10GbE LAN
(on left side of jack)
Green
Static Network connected
Blinking Network active
O󰀨 No network
Rear 10GbE LAN
(on right side of jack)
Green
Static
10 Gbps connected
Orange 1 Gbps connected
O󰀨 100 Mbps connected/No network
Note:
1
Please try to restart your Synology NAS or re-insert the drives, then run the HDD/SSD manufacturer's
diagnostic tool to check the health status of the drives. If you can sign in to DSM, please run the built-in
S.M.A.R.T. test to scan the drives. If the problem remains unresolved, please contact Synology Technical
Support for help.
2
If the
ALERT LED
continuously blinks orange, this indicates there are system errors such as fan failure,
system overheating, or volume degrade. Please sign in to DSM for detailed information.