Owners manual

TOOLS REQUIRED:
Plastic Prybar
10mm & 7mm Socket Wrench
3/16 Drillbit & Drill
Screwdriver
20433
2011
Chrysler 300C
2011 CHRYSLER 300C
Billet Grille
Install time: 30 Mins.
20433
2011
Chrysler 300C
Step 1 Factory Grille Shell Removal
• Remove 8 clips on the Plastic Cover. (Fig. 1)
• Carefully pull on Grille Shell to remove part of the Plastic Cover. (Fig. 2)
• With a Plastic Prybar Unclip the Plastic Cover from the Factory Grille Shell. (Fig. 3)
• Remove Plastic Cover. (Pull Grille Shell Carefully outward if Plastic Cover doesnt
come off.)
• Remove 2 clips on side Fender Well. (Fig. 4)
• Remove 10mm Bolt on the inner Fender. (Fig. 5)
• Pull Side Fender outward to Unclip. (Fig. 6)
• Remove 8 (7mm) Screws from Underneath the Factory Grille Shell. (Fig. 7)
• Remove Grille Shell and unclip the Electric Wire from the Fog Lights.
Step 2 Factory Grille Removal
• Remove 2 Clips on the Bumper Support. (Fig. 8)
PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS
BEFORE ATTEMPTING INSTALLATION.
PARTS LIST:
(1) Billet Grille
(7) #8 Flat Nuts
(7) 3/4 #8 Screws
Fig 6
Fig 7
Fig 4
Fig 2
Fig 1
Fig. 3
Fig 5
Fig 8
Page 1 of 25/23/11
Fig 2
Fig. 2