Operation Manual

12
GB
Setting Personal Data
3B SETTING PERSONAL DATA
A B C
D E F
G H I
J K L
M N O
P Q R
S T U
V W X
Y Z
14
Start setting personal data in the opponent display. Press the purple key until the word
OPPONENT appears at the bottom right of the display (fig.13).
You now have the following options to continue
1 To go to ID number, set name, pulse rate limits and body weight, press MENU (yellow key).
The ID number will start to flash at the upper left.
> Continue with Select ID Number, Set Name, Pulse Rate Limits and Body Weight.
2 To delete the personal data settings completely:
> Continue with Delete Personal Data.
Select ID Number (fig.13.1)
The ID number will start to flash at the upper left.
1 Using the +/- key, you can browse ID numbers 1 to 99. Select a free ID number.
You should now either continue or stop setting personal data.
1 If you would like to continue with name, minimum and maximum pulse rate limits and body
weight settings, press the MODE key.
The first character position of the name will start to flash at the upper left.
> Continue with Name, Minimum and Maximum Pulse Rate Limits and Body Weight Settings.
2 If you would like to stop the settings, press STORE (white key) and the entered data will be
saved. If you do not wish to save the data, press CANCEL (orange key).
Setting name, minimum and maximum pulse rate limits
and body weight settings (fig.13.2)
The first character position of the name will start to flash at the upper left.
1 Using the +/- key, select the first letter or number of the name.
By pressing the + key, all the letters of the alphabet will appear successively, followed by
the numbers 0 to 9, followed again by the letter A (fig.14).
You can speed up the letters or numbers by pressing the +/- key. Release the key when
the desired value appears.
2 Press the MODE key.
The second character position will start to flash at the upper left.
3 Using the +/- key, select the second letter of number of the name.
4 Repeat steps two and three to enter a maximum of 16 characters.
Each time you press the MODE key, you move on to the next character
position. With the SET key, you can return to the previous character
position.
5 Press the MODE key three times if the name is shorter than
16 characters. Press it once if the name contains exactly 16 characters.
The words MINIMUM PULSE RATE LIMIT will start to flash in the
centre of the display.