Operation Manual

7 Press the MODE key.

SLOPE, or WATT will start to flash.

8 Using the +/- key, set the value of SLOPE, or WATT.

9 Press the MODE key.

Km/Mi or will start to flash.

10 Using the +/- key, set the value of Km/Mi or .

If you selected pulse/time or pulse/distance, we recommend that you set the time at five

minutes and the minimum distance at 2 Km/Mi per route.

11 Press the MODE key.

ROUTE 1 or 2 will start to flash at the bottom left.

12 Using the +/- key, set the ROUTE at 2 or 3.

13 Repeat steps 7 to 12 to set a maximum of 15 routes.

You can speed up the numbers or letters by pressing and holding the +/- key. You will move

a step ahead with the MODE key. With the SET key, you can move back a step.

14 After completing the settings, press STORE (white key) to save the new program. If you do not

want to save the program, press CANCEL (orange key).

Deleting a Program (fig.15.4)

P 1 to P10 will appear on the display.

1 Press DELETE (orange key).

DELETE and P.. will start to flash, with CANCEL below and ENTER next to it.

2 By pressing CANCEL (orange key), you can still stop the delete procedure. By pressing ENTER

(white key), you will confirm the delete procedure.

Setting Training Programs