Operation Manual

5 VIEWING THE TRAINING INFORMATION
Viewing the Training Information on the Display
To view the training information, go to the program display. Press the purple key until the word
PROGRAM appears at the bottom right of the display.
1 Using the +/- key, select the program information you wish to view (at the top of the display
you can see how many SCORES or OPPONENTS are stored in the program).
2 After selecting the desired program with scores or opponents, press PROGRAM (purple key).
You are now in the opponent display.
3 Now press the SET key once.
At the top of the display OPPONENT 1 or SCORE 1 will start to flash (fig.34).
4 Using the MODE key, you can browse through six
displays with recorded training information: the speed
display, the cadence display, the pulse rate display,
the date and time of the training session, the rider’s
personal data and the last Watt display. Using the
+/- key, you can switch back and forth among the
various SCORES or OPPONENTS.
Printing the Training Information
To print the training information via a printer connected to a parallel port, go to the program
display. Press the purple key until the word PROGRAM appears at the bottom right of the
display.
1 Using the +/- key, select the program information you wish to print (at the top of the display
you can see how many SCORES or OPPONENTS are stored in the program).
2 Check whether the printer setting is correct.
> See 3A Printer Set-up.
3 Connect a printer cable via Grand Excel’s parallel port to the printer.
4 Press MENU twice (yellow key).
The display will show LAY-OUT ...
5 Using the + key you can browse successively through the displays shown below and the
scores or opponents of the program selected.
PRINT LAY-OUT ID Identity overview. Complete list with all ID numbers and
related personal data.
PRINT LAY-OUT OPP Opponent overview. Complete overview of all programs
stored in Grand Excel’s memory, with scores and opponents
recorded in these programs.
PRINT LAY-OUT P.. Performance overview. Complete overview of the training
information in the selected program.
6 To print the selected display, press the white START key. To return to the program display,
press CANCEL (orange key).
27
GB
Viewing the Training Information
1OPPONENT
SPD
32
ON/OFF OPPONENTDELETE
MAX AVS
ENTER
34