User Manual

How to Improve Performance
December 2007 Revision 3.5 35/48
Figure 19: Upgrade Firmware Window
5. The Download procedure may take several minutes. A progress bar is displayed at the
bottom right-hand side of the L200 Explorer window.
6. If the new firmware has been successfully downloaded, a message is displayed. If the final
dialog box at the end of the procedure contains an error message, reload the original
firmware supplied with the TR-L100 Reader and contact your approved TAGSYS
representative.
7. Click OK to reset the TR-L100 Reader.
Always use Firmware upgrades supplied by TAGSYS. If you have any doubt on the origin of
the firmware you intend to download; contact your TAGSYS approved reseller. Any attempt
to download a Firmware supplied by a third party may lead to permanent damages to the
TR-L100 Reader.
Never interrupt the Firmware upgrade procedure while the firmware is being downloaded.
This may lead to permanent damages to the TR-L100 Reader.