User Manual

Textile L100 Reader User's Guide
48/48 Revision 3.5 December 2007
In this example, the scanning parameters must be carefully selected. As both the Scan Number
and Scan Duration parameters are the same for all three patterns, if the Scan Number is set to 1,
Antenna 2 in Pattern 3 will not be read.
If the Scan Duration is set to 100 ms. and the Scan Number is set to 2, the tags detected by
Antenna 1 will be read twice (for 100 ms. each time) in Pattern 1, then the tags detected by
Antenna 2 will be read twice (for 100 ms. each time) in Pattern 2. In Pattern 3, the tags detected by
Antenna 1 will be read once for 100 ms. and then the tags detected by Antenna 2 will be read once
for 100 ms.
In the event that the Scan Number parameter is set to 3, the tags detected by Antennas 1 and 2
are read three times in Patterns 1 and 2, respectively. In Pattern 3, the tags detected by Antenna 1
are read once, then the tags detected by Antenna 2 are read once, and then the tags detected by
Antenna 1 are read a second time.
Each pattern will be executed for the same amount of time regardless of the number of
antennas selected in the pattern.
This duration is equal to the Scan Number x Scan Duration.