User's Manual

USING AN RJ45 JACK
Plug one end of the Ethernet cord (not provided) into a modular RJ45
wall jack.
Plug the other end of the Ethernet cord (not provided) into
the RJ45 jack on the back of your IDEAL LIFE Pod™.
Connect the small end of the power supply into the power
AC jack on the back of the IDEAL LIFE Pod™ marked
POWER. Plug the other end into an AC power outlet.
Your IDEAL LIFE Pod™ will automatically power up once it is
plugged in to an AC power outlet.
RECHARGING BATTERIES WITH YOUR IDEAL LIFE POD™:
• Remove the battery compartment door on the bottom of your IDEAL LIFE Pod™ by pushing gently
in the direction shown on the battery cover.
• Place the rechargeable batteries as marked.
• Replace the battery compartment door and push the compartment door shut in the opposite
direction shown on the battery cover.
• When using rechargeable batteries with your IDEAL LIFE BP-Manager™, simply place them in your
IDEAL LIFE Pod™ for 10 hours to recharge when battery status is low as indicated on your IDEAL
LIFE BP-Manager™
Powering UpYour IDEAL LIFE BP-Manager™
INSTALLING THE BATTERIES (INCLUDED)
• Remove the battery compartment door on your IDEAL LIFE BP-Manager™ by lifting the battery door
using the notch
• Place the batteries as instructed on the device
• Replace the battery compartment door and click into place
Note:
Replacing the battery does not affect previous test results stored in memory of the meter. However,
Installation
Instruction Manual
11
Ideal BP Manual Jan09:Ideal BP Manual July07 8/4/09 9:48 AM Page 11