Installation Guide

ManualsBrandsTAM-RAIL ManualsOther6 ft. x 36 in. 36-Degree to 41-Degree PVC White Stair Rail Kit with Colonial Balusters

INSTRUCTIONS FOR INSTALLING STRAIGHT RAIL KIT BETWEEN

POSTS WITH PRE‑INSTALLED 22.5° OR 45°

ANGLE ADAPTERS:

1. Measure opening between the bottom rail metal brackets. Mark the length on the bottom rail, ensuring that the balusters will be evenly spaced between posts.

IMPORTANT: A minimum of 1‑7/8" rail length is required from the end of rail to ﬁrst baluster on both ends of the rail. Check end spacing and shift the position of the rail before cutting if

required. Ensure that the gap between posts and balusters will not exceed 4".

2. When marked properly cut the bottom rail.

Refer back to the TAM‑RAIL Straight Rail Installation Instructions for installing TAM‑RAIL Straight Rail Kits.

INSTRUCTIONS FOR INSTALLING STRAIGHT RAIL KIT

BETWEEN A POST WITH PRE‑INSTALLED 22.5° OR 45°

ANGLE ADAPTERS AND A FLAT POST SURFACE:

1. Use the bracket placement template on the box of the TAM‑RAIL Straight Rail Kit to position the top and bottom metal brackets on the ﬂat post surface.

2. Secure the metal brackets to the ﬂat post surface using six screws, afﬁxing four on top and two on the bottom. Use the 2" screws included in the TAM‑RAIL Straight Rail Kits for mounting to

a wood post, or the 1" screws included in TAM‑RAIL Post Mount Kit when mounting to the TAM‑RAIL Post Mount System.

3. Measure the opening between the bottom rail metal brackets.

Mark the length on the bottom rail, ensuring that the balusters will be evenly spaced.

IMPORTANT: A minimum of 1‑7/8" rail length is required from the end of rail to ﬁrst baluster on both ends of the rail. Check end spacing and shift the position of the rail before cutting if required.

Ensure that the gap between posts and balusters will not exceed 4".

4. When marked properly cut the bottom rail.

Refer back to the TAM‑RAIL Straight Rail Installation Instructions for installing TAM‑RAIL Straight Rail Kits.

STRAIGHT RAIL KIT MOUNTED BETWEEN

ANGLE ADAPTER AND A FLAT POST SURFACE

ANGLED POST

STRAIGHT POSTANGLED POST

STRAIGHT RAIL KIT MOUNTED

BETWEEN ANGLE ADAPTERS

FIXED ANGLE ADAPTER

INSTALLATION

Straight Rail Kit Between Posts

Accommodates 45º and 22.5º horizontal angle applications for attaching TAM‑RAIL

Straight Rail Kits to a

TAM‑RAIL Post Mount System, or wood post covered by a TAM‑RAIL Post Sleeve