Network Router User's Manual

TANDBERG GW Data port Command Interface User Guide
26
Example of GatewayCall feedback:
*s GatewayCall 1 (status=Inactive): /
*s/end
OK
*s GatewayCall 1 (status=Active):
CallRef 1: 1
CallRef 2: 2
*s/end
OK
xstat gatewaycall 1
*s GatewayCall 1 (status=Active):
CallRef 1: 1
CallRef 2: 3
*s/end
OK
SystemLoad
Returns the current system load in percentage.
SystemLoad
Status format:
SystemLoad <1..100>
Call [1 .. 360]
Displays the session legs within gateway calls. Every session can have a
maximum of three legs: calling and called party and the phonebook or IVR menu.
Call
Parameters:
• Status [1 .. 360], the status of the different session legs.
NTP
Returns the IP address of the NTP server.
Status format:
<Status>
<Address>
<Port>
<Last Update>
<Last Correction>
---
Parameters:
• Status, indicates whether the NTP server is active or not.
• Address, the IP address of the NTP server.
• Port, is default 123.
• LastUpdate, indicates the last update date and time.
• Last Correction, the time correction in seconds.
Example of NTP feedback:
*s NTP (status=Active):
Address: "131.188.3.220"
Port: 123
LastUpdate: "2006-04-10 15:21:14"