Network Router User's Manual

TANDBERG GW Data port Command Interface User Guide
28
feedback to 3 different URLs. The system allows a total of 20 XPath
expressions to be registered, with a maximum of 15 for a single URL.
Parameters:
• ID: <1 .. 3> ID for the registration. If this parameter is omitted the
system uses the first vacant ID.
• URL(r): <S: 0, 256> The URL to post feedback to.
• Expression: 1 .. 15: <S: 0, 256> XPath expression
OK Result parameters:
• ID: <1 .. 3>
ERROR Result parameters:
• Cause: <1…> Cause code specifying why the command was not
accepted by the system
• Description Textual description of the cause code.
Example:
xCommand feedbackregister url:http://10.47.14.185:8000
expression.1:status/call
expression.2:status/conference
*r Result (status=OK):
ID: 2
*r/end
OK
FeedbackDeregister
Command used to deregister XML feedback over HTTP(S).
Parameters:
• ID: <1 .. 3> ID for the registration to deregister.
OK Result parameters:
• ID: <1 .. 3>
ERROR Result parameters:
• Cause: <1…> Cause code specifying why the command was not
accepted by the system
• Description Textual description of the cause code.
Example:
xCommand feedbackderegister id:1
*r Result (status=OK):
ID: 2
*r/end
OK
OptionKeyAdd
Command used to set new option keys.
Parameters:
• Key(r): <S: 0, 90> option key
NOTE! Always reboot the system after adding option keys, for the option key
to take effect.