User Guide Taoglas EDGE™ RTK Starter Kit with High Precision GNSS Next-generation IoT device and software platform Taoglas EDGE™ RTK Starter Kit Set Up instructions ES10B: Taoglas EDGE™ ES10 - RTK Starter Kit with US LTE ES10L: Taoglas EDGE™ ES10 - RTK Starter Kit with EMEA LTE IG-20-8-004-B ES10 User Guide Rev 04/22 taoglas.
Taoglas EDGE™ RTK Starter Kit Next-generation IoT device and software platform User Guide Contents 1. Introduction 1.1 What’s in the Box? 3 1.2 Support 3 2. Set Up 4 2.1 Device Startup 4 2.2 Account Setup 4 2.3 Activating your Device 5 3. Using the EDGE RTK Starter Kit IG-20-8-004-A 3 8 3.1 Device Overview 8 4. Using EDGE Insights 9 4.1 Insights Navigation 9 4.2 Device Management 10 4.3 Dashboard 11 4.4 Sensor Notification Rules 14 4.5 Add New Users 17 4.6 Support 17 5.
1. Introduction The Taoglas EDGE™ RTK Starter Kit with High Precision GNSS enables real time insights and intelligence to help your enterprise save costs, increase revenue and enhance compliance. It is a next-generation IoT device with cellular, Bluetooth, and on-board sensor capabilities with a cloud based connectivity and device management platform. 1.1 What’s in the Box? 1. Taoglas EDGE RTK Starter Kit with High Precision GNSS 2. Micro-USB Cable 3.
2. Set Up 2.1 Device Startup 1. To power on the EDGE RTK Starter Kit press the Power Button once. 2. The EDGE RTK Starter Kit should be fully charged before use, using the provided Power Button power supply. When you plug the EDGE RTK Starter Kit into the provided USB power User LED supply, the USB Power LED will illuminate. If the EDGE RTK Starter Kit requires USB Power LED charging, the Charge Status LED will illuminate, otherwise the Charge Status Charge Status LED LED will remain off.
3. Once your information has been submitted, you will need to confirm your registration by clicking the link sent to the email address provided. 4. Upon clicking the link, a browser will open and you will be requested to create a password. 5. After entering and confirming your password, registration is now complete, proceed to device activation. 2.3 Activating your Device 1.
3. To activate your EDGE RTK Starter Kit, click ‘Activate New Device’ at the bottom of the page, a popup window will request your EDGE IoT Starter Kit S/N and Activation Code. After entering these, click ‘Submit’ to finish the activation process. The EDGE RTK Starter Kit S/N and Activation Code can be found on the card included in the box. 4. After entering the EDGE RTK Starter Kit S/N and Activation Code, click ‘Submit’ to activate your EDGE RTK Starter Kit. 5.
Edit Device rollover overview Edit Device 3. Navigate to the locate.taoglas.com and log into your account, if you don’t have an account already please see Section 2.2. 4. Once logged in, go to the device list page by clicking devices at the top right of the screen. 5. On the device list page click on the edit icon( edit page. ) on the device you want to enable with RTK, this will load the device 6.
3. Using the EDGE RTK Starter Kit 3.1 Device Overview The EDGE RTK Starter Kit has 2 buttons and 3 LED’s. See the diagram below for an overview of the LED’s and buttons. Power Button User Button User LED USB Power LED Charge Status LED Light Sensor USB Port This device must be used outdoors with a clear view of the sky • To power on the EDGE RTK Starter Kit, push the Power Button once.
4. Using EDGE Insights 4.1 Insights Navigation 1. When you login to your account, you will land on the Dashboard page. For instructions on activating an EDGE RTK Starter Kit on your account, please refer to the Activating your Device section. 2. You can use the links on the top of EDGE Insights interface to navigate between your dashboard, device list page and account management pages. a. Dashboard will bring you to your dashboard where you can see all the sensor data uploaded by your EDGE RTK Starter Kit.
4.2 Device Management 1. You can edit the details for an individual device by clicking the edit icon( ) on the devices page. 2. This will direct you to the Edit Device page, from here you can amend the following: a. Device Name, here you can enter a customized name for your EDGE RTK Starter Kit. b. Address, here you can enter your address. c. Upload Interval, this is the rate at which the EDGE RTK Starter Kit will upload recorded sensor samples to EDGE Insights. d.
3. Depending on your device type and the sensors associated with it you will be able to set the individual sensor sampling intervals in the Device Parameters section. a. Simply enter the sampling interval in the format HH:MM:SS into the text box next to the sensor name. b. For an example, see Humidity sensor which has a sampling interval of 15 minutes (00:15:00). 4.3 Dashboard 1. On loading the dashboard view on locate.taoglas.
Select Farenheit or Celsius 3. The sensor data view of the dashboard allows you to: a. View the latest sensor samples uploaded from your EDGE RTK Starter Kit (Green panels at the top). b. View plots of sensor data over a period of time. c. Download historical sensor data by clicking the download icon( ) at the top right of each plot, this will download the data as comma-separated values. d. By clicking on the ( ) icon on the Temperature data chart you can alternate between Farenheit and Celsius.
3. The Device Locations view displays a table of location samples uploaded by your EDGE RTK Starter Kit over the period of time selected at the top left of the table. a. The above samples can also be downloaded by clicking:. i. -Downloads the table data as comma-separated values. ii. -Downloads the table data in a JavaScript Object Notation format 6. The Device Route Map view shows the historical location samples as well as the current location reported by your EDGE RTK Starter Kit.
4.4 Sensor Notification Rules 1. EDGE Insights allows you to notify a group of contacts based on an uploaded sensor value. 2. To do this you will first have to add a contact to EDGE Insights, click ‘Settings’ followed by ‘Notification Contacts’ at the top of the screen. 3. A page listing all the contacts associated with your account will appear, this will be empty if no contacts have been added. Click the ‘Add New Contact’ button. 4.
7. Click, ‘Add New Group’, on the screen that follows, please: a. Enter the name you wish to give the notification group b. Select the contacts you wish to add to the group. c. Select the max frequency you wish to notify the group, for example selecting ‘Once a day’, will only notify the group once in a 24 hour period, regardless of the number of times the rule associated with the notification is triggered. 8. Once you have entered the above information, click ‘Submit’ to create the group. 9.
The above screenshot will trigger the notification if a temperature sample with a value less than 10°C is uploaded to EDGE Insights. 11. Once all the information has been completed, click ‘Submit’. 12. The rule is now available to apply to the devices associated with your account. 13. To do this, navigate to the devices list page by clicking ‘Devices’. 14. Click the edit icon( ) on the device you want to add the rule to, this will bring up the device edit page. 15.
4.5 Add New Users 1. To add a new user so that they can view the devices you have activated on your account, click ‘Settings’ followed by ‘Users’. 2. The users list page will appear, click ‘Add New User’, which will bring you to a page which allows you to add a new user. 3. On this page enter the users: a. Email address b. Username c. First name d. Last name e. Address 4. Click ‘Submit’ to add the user. 5. A new user will be emailed informing them of their new account. 4.6 Support 1.
5. Appendix 5.1 FAQ For FAQ’s about the EDGE RTK Starter Kit Set Up please visit taoglas.com/iot-support For technical support please contact iotsupport@taoglas.com 5.2 Security The EDGE RTK Starter Kit device security is provided by four mechanisms: 1. Connection to the Cloud-based components via HTTPS, with the servers public certificates held on the EDGE RTK Starter Kit device. 2.
Federal Communication Commission Interference Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
taoglas.com All copyrights, trademarks and any other intellectual property rights related are owned by Taoglas Group Holdings Limited.
