User Guide

IG-20-8-004-A
4
2. Set Up
2.1 Device Startup
1. To power on the EDGE RTK Starter Kit press the Power Button once.
2. The EDGE RTK Starter Kit should be fully charged before use, using the provided
power supply. When you plug the EDGE RTK Starter Kit into the provided USB power
supply, the USB Power LED will illuminate. If the EDGE RTK Starter Kit requires
charging, the Charge Status LED will illuminate, otherwise the Charge Status
LED will remain o. The EDGE RTK Starter Kit is not intended to be charged
using a computer USB.
3. Once powered on and initialised, the User LED will flash white 3 times.
4. At this stage you can check the battery level by pressing the Power Button once.
The User LED will blink a number of times according to the battery level.
Find more information on this in the Device Overview section below.
5. The device will start uploading to EDGE Insights straight away. To view any uploaded
samples, you will need to register an account and activate your device on
locate.taoglas.com.
2.2 Account Setup
1. To create an EDGE Insights account for your EDGE RTK Starter Kit devices, navigate to
locate.taoglas.com and click on ‘Sign Up’.
2. Create a username and enter your details.
Power Button
USB Power LED
Charge Status LED
User LED