Installation Instructions

Tapcon Anchor
Installation Instructions
Product Information
:
Selection and Order Information
:
Suggested Specifications
Performance Data
:
Tapcon Condrive Tool Kit
:
Approvals and Listing
FEATURES
(A)
Fixture Thickness
—
determine the
fixture thickness to be anchored
(B)
Anchor Embedment
—
with a minimum
recommended embedment of 1", the
correct Tapcon anchor choice can be
made. Hole depth must be a minimum
1/4"
deeper
than the anchor embedment to
allow for displaced material
(C)
Hole Diameter
—
proper hole diameter
is very important to insure consistent
performance and maximum pullout
strength.
3/16" anchors require 5/32"
diameter bits, and 1/4" anchors require
3/16" diameter bits
Head Styles
3/16" diameter has a 1/4" slotted hex washer head (HWH)
1/4" diameter has a 5/16" slotted hex washer head (HWH)
3/16" diameter uses a #2 phillips flat head (PFH)
1/4" diameter uses a #3 phillips flat head (PFH)
APPROVALS / LISTINGS
ICC Evaluation Service, Inc.
–
#
ESR
-
1671
ICC Evaluation Service, Inc.
–
#
ESR
-
2202
Miami
-
Dade County
–
#
07
-
0315.03
Florida Building Code
ITW Red Head
•
2171 Executive Drive
•
Addison, IL 60101
•
630
-
350
-
0370
About Us
|
Careers
|
Press Releases
|
Privacy Policy
|
Terms and Conditions
copyright
©
2010 Illinois Tool Works, Inc.
Tapcon Anchor Installation Instructions