SDS

Page 4 of 10
Issuing date: July 24, 2019
If the battery material is released, remove personnel from area until fumes dissipate. Provide maximum ventilation to clear out
hazardous gases. Wipe it up with a cloth, and dispose of it in a plastic bag and put into a steel can. The preferred response is to
leave the area and allow the battery to cool and vapors to dissipate. Provide maximum ventilation. Avoid skin and eye contact
or inhalation of vapors. Remove spilled liquid with absorbent and incinerate.
7. Handling and storage
Precautions for safe handling:
Handling:
Do not breathe vapors or fumes that may be evolved during processing.
Do not disassemble or burn batteries.
Do not squeeze or pierce batteries.
Do not put batteries into water.
Workers must wear proper protective equipment and must operate strictly according to relative rules.
Conditions for safe storage, including any incompatibilities:
Avoid mechanical or electrical abuse. Storage preferably in cool, dry and ventilated area, which is subject to little temperature
change. Storage at high temperatures should beavoided. Do not place the batterynear heating equipment, nor expose to direct
sunlight forlong periods.
Incompatible substances or mixtures: No relevant information.
Packing material: No relevant information.
8. Exposure controls/personal protection
Control parameters:
Ingredients OSHA PEL-TWA ACGIH TLV-TWA
Copper (CAS: 7440-50-8) 1 mg/m
3
(Dusts and mists)
0.1 mg/m
3
(Fume)
1 mg/m
3
(Dusts and mists)
0.2 mg/m
3
(Fume)
Aluminum (CAS: 7429-90-5) 15 mg/m
3
(Total dust)
5 mg/m
3
(Respirable fraction)
1 mg/m
3
(Respirable fraction)
Engineering Control:
Use this product only in closed systems fully or with local exhaust ventilation.
Install washer eyes and safety showers near to the handling and storage area.
Shows the location of these facilities, with a clear and prominent warning board.
Personal Protective Equipment (for workers):
Protection of Hands:
Not necessary under conditions of normal use.
Recommend wearing protective gloves for industrial hygienic purpose (for contact with leakage from rupture).
Protection of Eyes:
Not necessary under conditions of normal use.