Instructions / Assembly

C
D
K
#F
#F
Washer
#G
Eye Bolt
#H
Screw (M6x75)
#I
#I
Nut
#E
Bar Spacer
• Place the Lower Net Pole (#D) next to the Vertical Leg Extension
(#8), slide the Eye Bolt(#G) from the bottom of the Lower Net Pole
(#C), insert it through the Bar Spacer (#E) and the top hole on
frame, secure it with Washer (#F) and Nut (#I) with Wrench (#M).
• Secure the bottom hole with Screw(#H), Bar Spacer (#E), Washer
(#F) and Nut (#I) with Wrench (#M).
• Repeat the above steps to assemble the Lower Board Pole (#B).
Lower Pole Assembly
STEP 2: Upper Pole & Pole Cap Assembly
• Slide the Upper Net Poles (#C) into Lower Net Poles (#D) as shown in figure 1. There are 7 sets in total.
• Place the Cap (#K) on top of the Upper Pole.
• Repeat the above steps to assemble the Upper Board Pole (#A), put the Open-Ended Cap (#N) on top
and slide the Pole Cover (#J) into the Upper & Lower Board Pole set.