Owner manual

Nameplate Data

Figure 1 shows an example of a MotorGuard nameplate. The following information is marked on the

nameplate:

♦ Part number: encoded model number explained on the following page

♦ FLA: the rated continuous operating current (RMS amps)

♦ System Voltage: the maximum VFD output voltage (fundamental)

♦ Hz: the maximum VFD output frequency (fundamental)

♦ Phase: 3 – The MotorGuard is designed for use only with 3 phase motors.

♦ Drawing #: outline and mounting dimension of filter

♦ Schematic #: schematic diagram of filter

♦ Manufacturing #: for TCI internal use

♦ Enclosure Type: Industrial filters are open panel construction or NEMA 1 enclosed. GP filters

are NEMA 1 or NEMA 3R enclosed.

Figure 1 – Example of MotorGuard Nameplate