Owner manual

21
Installation Guidelines
Mounting
The MotorGuard must be mounted vertically on a smooth, solid surface, free from heat, dampness, and
condensation.
Wiring
Cable Entry Locations
↓
(Lifting eye is optional)
Figure 3 – Cable Entry Location for General Purpose units
Field Wiring Connection Terminals
Compression type terminals may be provided for all field wiring connections. The control circuit
terminals will accommodate 18 AWG to 10 AWG wire and should be tightened to 18 in.-lbs. torque.
The wire size capacity ranges and tightening torque for the grounding and power terminals are listed in
Tables 11a and 11b.